DVV-EX 1000D6-XM

non-explosive roof fan

Price

Excl. Tax: €13,439 Incl. Tax: €16,261

in 6-8 weeks

The DVV-EX DVV-EX 1000D6-XM explosion-proof centrifugal roof fan is designed for extracting air from potentially explosive atmospheres in large areas. Housing of the DVV-EX explosion-proof roof fan is made of aluminium with a base plate made of galvanized steel.

Certification ATEX - II 2G c IIB T4
II - For potentially explosive areas other than mines
2G - For category 2 gases: Zones 1 and 2
c - structural protection
IIB - Explosion group: ethylene, hydrogen sulphide
T4 - Temperature class with maximum surface temperature below 135 °C

Speed [min-1]	980
Air Flow Volume [m3/h]	30600
Current [A]	12.1
Input Power [W]	5860
Voltage	400V
Duct diameter [mm]	1000
Min. temperature [°C]	20
Max. temperature [°C]	40
Protection IP	IP55
Noise [dB(A)]	73
Insulation class	F

Description

Housing	The explosion-proof roof fan housing is made of aluminium with a galvanized steel base plate and a copper inlet cone.
Impeller	The impeller is equipped with backward curved blades.
Motor	The fans are equipped with IEC motors with the EEx d explosion protection (pressure-proof enclosure).
Terminal block	The explosion-proof terminal block is located on the fan housing – “enhanced safety“ II 2G Ex e IIC T5/T6. Overheating protection is provided by built-in thermistor contacts connected to the terminal block of the fan. They must be connected to the U-EK 230E protective relay. Note: The U-EK 230E protective relay must be located outside the explosion zones!
Speed control	The speed is controlled by a frequency converter.

Additional Information

Weight [kg]	379
Availability	in 6-8 weeks
Manufacturer	Systemair
Type of good	fan
Design	non-explosive, roof
Min. temperature [°C]	20
Protection IP	IP55
Insulation class	F

Download