Select your country
Prices Inc.Tax Excl.Tax

Small centrifugal fans

Small centrifugal fans

The small radial fans are suitable for ventilation of toilets and bathrooms. The fans are designed for relatively long air ducts with higher pressure drop or for ventilation directly through walls. The small centrifugal bathroom fans can also be used for central ventilation.

Ecoair Design Ecowatt

Ecoair Design Ecowatt

The small centrifugal extract fans Ecoair Design Ecowatt are suitable to ventilation toilets, bathrooms, kitchens with relative logest air flow. EC fans with high effeciency and low consumption (max 7W). Fan engine Ecoair Design Ecowatt has ball bearings, it can be mounting into the ceiling or wall.

Fans Ecoair Design Ecowatt are suitable for demanding interior and architectural designs.

 

CB

CB

The CB small radial fans with a low front cover are designed for wall and ceiling mounting. The fans are suitable for ducts up to 13 m long and have an integrated non-return damper. The fans are available in a standard version or in a version marked T with an overrun timer.

 

EB

EB

The small centrifugal fans of the EB series are suitable for relatively long air ducts with higher pressure drop and for ventilation of bathrooms, toilets, etc. The EB radial fans can also be used for ventilation in residential buildings. The fans have an integrated non-return damper and are available in the following versions: S - standard, T - with an adjustable overrun timer of 5 - 25 minutes and HT - built-in humidistat (60 - 90%) with an adjustable overrun timer.

 

EBB

EBB

The EBB series small radial fans are suitable for relatively long air ducts with higher pressure drop. They are suitable for bathrooms and toilets. The EBB radial fans can also be used for ventilation in residential construction. The fans are equipped with a built-in non-return damper. The EBB small radial fans are available in the following versions: S - standard, T - with an overrun timer (2 - 20 minutes), HT - with a built-in humidistat with an overrun timer (2 - 20 minutes).

 

EBB DESIGN

EBB DESIGN

The EBB Design small radial fans are suitable for ventilation of bathrooms and toilets with discharge to common ventilation ducts or for longer air ducts. The fans are equipped with ball bearings and a tight non-return damper enabling the connection of a larger number of the fans to one ventilation duct. The EBB Design fans are adapted for surface mounting or can be partially built into a wall. The fans are available in the following versions: S - standard, T - with an overrun timer 1 - 30 minutes, M - control by means of a pull switch, HM - two-speed version with a humidistat and with a pull switch, DV - two-speed version with a pull switch.

 

SILENT A/U/ECO

SILENT A/U/ECO

The SILENT ECO fans are radial fans suitable for air extraction from bathrooms, showers and toilets with exhaust to common ventilation ducts. The fans are equipped with a tight non-return damper enabling the connection of up to 30 fans to one ventilation duct. The fan housing is made of white plastic. It is possible to connect an extension for air extraction from a secondary space to the housing (SILENT U). It is possible to order a fan equipped with a fire-resistant housing or with a fire shutter.

 

QUADRO

QUADRO

The VORT QUADRO type small radial fans are two-speed radial fans suitable for air extraction from bathrooms, showers and toilets with exhaust to common ventilation ducts. The fans are equipped with a tight non-return damper enabling the connection of several fans to one ventilation duct. The Micro I, Medio I and Super I fans are designed for flush mounting, the Micro, Medio and Super fans are designed for surface mounting.

 

Vort Quadro Evo

Vort Quadro EvoThe Vort Quadro Evo small centrifugal fans are one, two or three speed fans designed for air extraction from small rooms such as bathrooms, toilets, etc. The Vort Quadro Evo fans are equipped with ball bearings and can therefore be mounted on the wall or ceiling. Other versions are extended, for example, by an overrun timer, a motion sensor or a humidity sensor. The delivery includes only the fan and the front plate, the installation box is delivered separately. The installation boxes are sold in versions for wall mounting, for flush mounting and for flush mounting with a fire resistance of 90 minutes.
 

Helios ELS

Helios ELS

The ELS small radial fans excel in performance, quiet and economical operation and are suitable for ventilation of bathrooms, toilets, etc. The fans are used to ventilate rooms in prefabricated buildings with ventilation via exhaust stacks. They are able to ventilate air up to a 31st floor. The ELS fans have a built-in filter clogging indicator - the filter can be cleaned in a dishwasher. The fan is built into a flush-mounted housing, which is resistant to splashing water and is also manufactured in a fire-resistant design. When choosing this type of fan, it is also necessary to choose a suitable fan housing and the necessary accessories.

 

ER

ER

The small ER type radial fans with front cover and G2 filter are made of hardened plastic and are designed for ventilation of bathrooms, shower enclosures and toilets in family houses or residential buildings. The ER type fans have IP X5 ingress protection. The ER radial bathroom fans are designed for built-in wall or ceiling installation using a flush mounted housing that is not included.

The small ER radial fans are available: standard with one speed, with delayed start (50 seconds or 0 to 150 seconds), with overrun timer (6, 15 or 24 minutes), with a humidity sensor (humidistat), with a light sensor or with interval operation.

 

KN2

KN2

The KN 2 small centrifugal fans are suitable for ventilation of bathrooms and toilets with discharge to common ventilation ducts. The fans are equipped with ball bearings and a tight non-return damper allowing the connection of multiple fans to one ventilation duct. The UP type fans are designed for flush mounting, the AP type fans are designed for surface mounting.

 

CF

CF

The CF small centrifugal fans are suitable for relatively long air ducts with higher pressure loss. They are suitable for bathrooms, toilets, etc. The CF fans are mounted only with the fan axis horizontally and they are equipped with a non-return damper. The fans are available in the following designs: S - standard, P - with pull switch, T - with overrun timer adjustable in the range of 1 - 20 minutes and PT - combination of the design with pull switch and with overrun timer.

 

SWF

SWF

The SWF centrifugal wall fans are designed especially for outdoor mounting on facades of buildings. The fan sucks through a circular suction nozzle, which connects to the ventilation ducts. The discharge is downwards under the faceplate. The SWF fans have a radial impeller with backward curved blades.

 

CMF

CMF

The ventilation unit CMF are suitable for central ventilation more spaces in residental houses, offices, etc. Ventilation unit CMF can be use in conjuction with humidistat HYG 2 or humidistat combinated with thermostat for automatic ventilation wet spaces.

 

VENTURIA

VENTURIA

The Venturia small centrifugal fans are designed for central ventilation for family houses, offices, sanitary facilities, small establishments, etc. Advantageously, flexible ducts and disc valves can be used for installation in false ceilings. The Venturia central centrifugal fans are equipped with three-speed motors with thermal protection against overheating.

 

CK

CK

The CK centrifugal kitchen extractors are suitable for extraction of polluted air from kitchens. The fans are made of heat-resistant non-flammable white plastic. The fans are easy to disassemble into individual components, which can be easily washed in a dishwasher. The maximum ambient temperature is 60 °C.

 

AN

AN

The centrifugal hot air fans series AN are suitable for distribution hot air from fireplace insert to the another rooms in flats or in residental houses. All components of the fireplace fan AN is necessary to ensure the specified operating temperature.

 

Vort Press

Vort Press

The Vort Press small radial fans are designed for visible or flush mounting in walls and ceilings and for air extraction from small and medium-sized rooms in residential and commercial buildings. The fans are equipped with motors with IPX4 rating with the possibility of connecting a controller. The Vort Press fans are equipped with a rubber seal for vibration damping, ball bearings (with a guarantee of 30,000 hours of trouble-free operation) and a silicone non-return damper to prevent air backflow.

 

Ariett

Ariett

The Ariett small radial fans are designed for flush and surface mounting on walls or ceilings and for air extraction from small and medium-sized rooms in residential and commercial buildings. Thanks to the profile of the impeller blades, the fans achieve low noise level and low energy consumption. The Ariett fans are equipped with ball bearings (guaranteed 30,000 hours of trouble-free operation), a non-return damper to prevent air backflow, and the fans marked T are equipped with an overrun timer (3 to 20 minutes). The Ariett Habitat fans have two-speed motors.

 

FLUX

FLUX

The fans FLUX are centrifugal fans suitable for ventilation bathrooms, showers and toilets with extraction into the central ventilation flow. Fans are equipped with tight-return valve enabling connection of multiple fans to one ventilation pipe.

 

OZEO

OZEO

The OZEO small centrifugal fans are designed for central ventilation in family houses, sanitary facilities, offices, small business premises, etc. The fan housing is made of plastic or extruded polypropylene

OZEO EThere are 4 inlets with a diameter of 125 mm and one outlet with a diameter of 125 mm on the housing. Three inlets are equipped with plugs. The inlets can be rotated by 90°. The outlet can be rotated 360°. 
OZEO HThere are 6 inlets with a diameter of 80 mm, one inlets with a diameter of 125 mm and one outlet with a diameter of 125 mm on the housing. Four inlets are equipped with plugs. The inlets and outlet can be rotated by 90°. 
OZEO FlatThanks to their low profile and low weight, the OZEO Flat fans are suitable for installation in confined spaces. There are 4 inlets with a diameter of 80 mm, one inlet with a diameter of 125 mm and one outlet with a diameter of 125 mm on the housing. Four inlets are equipped with plugs. The 80 mm inlets can be rotated by 90°.

 
novy