Transport fans

The transport fans are designed for extraction of coarse and loose materials such as sawdust, woodchips, grain and for air extraction during grinding, welding, etc. The transport fans find their application mostly in the engineering and agricultural industry, but their resistance will be appreciated also by the operators of small and medium-sized workshops.
The fans are designed to achieve high vacuum values. Due to the spheres and applications where the transport fans are used, the Transfer ducts or the Flexadur and Ventitec flexible hoses for the extraction of abrasive materials are most often used as recommended accessories, depending on the content and temperature of the extracted air.
-
K 311/2 R4A
transport fanExcl. Tax: €1,028.61 Incl. Tax: €1,244.62in 6-8 weeksAir: 230Noise: 72 -
K 351/2 R4A
transport fanExcl. Tax: €1,090.33 Incl. Tax: €1,319.30in 6-8 weeksAir: 260Noise: 73 -
K 401/2 R4A
transport fanExcl. Tax: €1,217.55 Incl. Tax: €1,473.24in 6-8 weeksAir: 290Noise: 74 -
K 451/2 R4A
transport fanExcl. Tax: €1,371.88 Incl. Tax: €1,659.97in 6-8 weeksAir: 290Noise: 76 -
K 501/2 R4A
transport fanExcl. Tax: €1,625.02 Incl. Tax: €1,966.27in 6-8 weeksAir: 290Noise: 78 -
K 561/2 R4A
transport fanExcl. Tax: €1,904.08 Incl. Tax: €2,303.94in 6-8 weeksAir: 330Noise: 80 -
K 631/2 R4A
transport fanExcl. Tax: €2,251.06 Incl. Tax: €2,723.78in 6-8 weeksAir: 450Noise: 82 -
K 632/2 R4A
transport fanExcl. Tax: €2,176.98 Incl. Tax: €2,634.15in 6-8 weeksAir: 610Noise: 81 -
K 711/2 R4A
transport fanExcl. Tax: €2,726.49 Incl. Tax: €3,299.05in 6-8 weeksAir: 860Noise: 85 -
K 712/2 R4A
transport fanExcl. Tax: €2,573.35 Incl. Tax: €3,113.75in 6-8 weeksAir: 830Noise: 84 -
K 801/2 R4A
transport fanExcl. Tax: €4,036.61 Incl. Tax: €4,884.30in 6-8 weeksAir: 950Noise: 88 -
K 802/2 R4A
transport fanExcl. Tax: €3,374.78 Incl. Tax: €4,083.48in 6-8 weeksAir: 1080Noise: 85 -
-25%
K 901/2 R4A
transport fanRegular Price: €4,968.90 €6,012.37
Special Price Excl. Tax: €3,726.67 Incl. Tax: €4,509.27
in 6-8 weeksAir: 1790Noise: 90 -
K 902/2 R4A
transport fanExcl. Tax: €4,870.12 Incl. Tax: €5,892.85in 6-8 weeksAir: 1510Noise: 89 -
KA 1001/4 P4A 11 kW
transport fanExcl. Tax: €5,996.29 Incl. Tax: €7,255.51in 6-8 weeksAir: 4300Noise: 86 -
KA 1002/4 P4A 9,2 kW
transport fanExcl. Tax: €5,996.29 Incl. Tax: €7,255.51in 6-8 weeksAir: 4250Noise: 84 -
KA 401/2 P4A 0,75 kW
transport fanExcl. Tax: €1,217.55 Incl. Tax: €1,473.24in 6-8 weeksAir: 550Noise: 75 -
KA 451/2 P4A 1,1 kW
transport fanExcl. Tax: €1,371.88 Incl. Tax: €1,659.97in 6-8 weeksAir: 640Noise: 78 -
KA 451/2 P4A 1,5 kW
transport fanExcl. Tax: €1,431.14 Incl. Tax: €1,731.68in 6-8 weeksAir: 760Noise: 79 -
KA 501/2 P4A 2,2 kW
transport fanExcl. Tax: €1,691.71 Incl. Tax: €2,046.97in 6-8 weeksAir: 950Noise: 82 -
KA 501/2 P4A 3 kW
transport fanExcl. Tax: €0 Incl. Tax: €0in 6-8 weeksAir: 1080Noise: 82 -
KA 561/2 P4A 3 kW
transport fanExcl. Tax: €1,978.16 Incl. Tax: €2,393.57in 6-8 weeksAir: 970Noise: 86 -
KA 561/2 P4A 4 kW
transport fanExcl. Tax: €2,059.67 Incl. Tax: €2,492.20in 6-8 weeksAir: 1500Noise: 86 -
KA 631/2 P4A 5,5 kW
transport fanExcl. Tax: €2,485.67 Incl. Tax: €3,007.66in 6-8 weeksAir: 1380Noise: 90 -
KA 631/2 P4A 7,5 kW
transport fanExcl. Tax: €2,647.47 Incl. Tax: €3,203.44in 6-8 weeksAir: 2150Noise: 90
VAN
Thanks to their design, the VAN high-pressure transport fans achieve high suction and mainly vacuum performances at relatively low input power consumption. The VAN radial transport fans are most often used for air suction without filtration during welding or grinding and for transport of loose material such as chips, sawdust, woodchips, and the like.K

K are transport centrifugal fans designed for continuous operation, temperature of transported air from -20 to 60 °C. The casing of the transport fan is made of steel sheet protected by cataphoretic primer and polyurethane varnish. The K centrifugal fans are designed for small material transport or pneumatic conveying (dust quantity < 50000 mg/m3). On request, the fan can be supplied in stainless steel, two-speed motor or high-temperature version up to 150 °C.
Data sheet of the product series: ds-k-en.pdf
KA

KA are transport centrifugal fans designed for continuous operation, temperature of transported air from -20 to 60 °C. The casing of the transport fan is made of steel sheet protected by cataphoretic primer and polyurethane varnish. The KA centrifugal fans are designed for small material transport or pneumatic conveying (dust quantity < 50000 mg/m3). On request, the fan can be supplied in stainless steel, two-speed motor or high-temperature version up to 150 °C.
Data sheet of the product series: ds-ka-en.pdf
KB

KB are transport centrifugal fans designed for continuous operation, temperature of transported air from -20 to 60 °C. The casing of the transport fan is made of steel sheet protected by cataphoretic primer and polyurethane varnish. The KB centrifugal fans are designed for small material transport or pneumatic conveying (dust quantity < 50000 mg/m3). On request, the fan can be supplied in stainless steel, two-speed motor or high-temperature version up to 150 °C.
Data sheet of the product line: ds-kb-en.pdf
KC

KC are transport centrifugal fans designed for continuous operation, temperature of transported air from -20 to 60 °C. The casing of the transport fan is made of steel sheet protected by cataphoretic primer and polyurethane varnish. The KC centrifugal fans are designed for small material transport or pneumatic conveying (dust quantity < 50000 mg/m3). On request, the fan can be supplied in stainless steel, two-speed motor or high-temperature version up to 150 °C.
Data sheet of the product series: ds-kc-en.pdf
KM

KM are transport centrifugal fans designed for continuous operation, temperature of transported air from -20 to 60 °C. The casing of the transport fan is made of steel sheet protected by cataphoretic primer and polyurethane varnish. The KM centrifugal fans are designed for small material transport or pneumatic conveying (dust quantity < 50000 mg/m3). On request, the fan can be supplied in stainless steel, two-speed motor or high-temperature version up to 150 °C.
Data sheet of the product series: ds-km-en.pdf




















