Loading- Description
-
Housing The fan housing is made of stainless sheet, galvanized and equipped with gray epoxy varnish. The engine is mounted outside the flow of air in the channel across the fan casing. Engine cooling fan, which is part of its design.
Impeller The impeller is made of AL alloy, it is statically and dynamically balanced and it has surface with epoxy varnish.
Motor The engine is asynchronous with squirell cage, class of insulation F, with ball bearings and it has own cooling fan. Protection IP55.
Terminal block The terminal block is one of part the engine. Protection IP44 (IP55).
Noise level The noise emitted by fan is shown in tables, measurement is done at a distance equal to three times the diameter of the impeller (at least 1.5 meters) on the intake side.
Installation The mounting of this fans recommended with regards to life of bearings in horizontal position, with the ventilation shaft vertically to ensure cooling of the motor. In the case that forced ventilation is provided with a motor shaft, mounting is possible in a different position. Alternatively supplied motors in thermal. In this case, it is necessary to use a wiring diagram that is in the documentation supplied with the fan. Thermocouple must always be connected, otherwise it will void the warranty of the engine. Fans are suitable for exhausting hot gases. Request delivery terms and delivery dates.
Direction of rotation The direction of rotation is determined by the arrow on the fan housing.
- Additional Information
-
EAN 8413893233790 Weight [kg] 90 Availability out of sortiment Manufacturer Soler & Palau Type of good fan Design duct Protection IP IP55 Insulation class F - Download
-
3D DXF tet2-400-3d.dxf 3D DWG tet2-400-3d.dwg 2D DXF tet2-400-2d.dxf 2D DWG tet2-400-2d.dwg - Reviews
-
