SILENT ECO A 100/GL

bathroom radial fan

ball-bearings for the wall non-return damper two-speed

Price

Regular Price: €369 €446

Special Price Excl. Tax: €291 Incl. Tax: €353

central warehouse

Delivery to 02.05?
Order Tomorrow to 12:00

Qty:

The SILENT ECO A 100 GL two-speed fan is a version with discharge facing backwards. The fan housing is made of white plastic. The housing can also be available in other shades, commonly used in sanitary technology. The front grille contains a filter and a silencer. The SILENT ECO A fans are supplied without overrun timer. We recommend the DT 3 R timer, see accessories.

Speed [min-1]	1200
Air Flow Volume [m3/h]	107
Output [W]	4,5
Voltage	230V
Max. temperature [°C]	40
Duct diameter [mm]	80
Protection IP	IPX5
Noise [dB(A)]	24

Description

	The SILENT ECO A fan is a radial fan suitable for air extraction from bathrooms, showers and toilets with exhaust to common ventilation ducts. The fan is equipped with a tight non-return damper enabling the connection of up to 30 fans to one ventilation duct. The SILENT ECO A fan is designed for surface mounting on plaster or wall.
Housing	The housing is made of white ABS plastic. The ECO-A type fans have discharge facing backwards. The diameter of the discharge port is 78 mm. The ECO-U type fans have discharge facing backwards (Z) or upwards (H), for ducts with a diameter of 75-80 mm. There is a non-return damper in the discharge direction. Mounting is possible on walls, under plaster or in suspended ceilings. The front grille contains a filter and a silencer.
Impeller	The impeller is radial with forward curved blades, pressed on the outer rotor.
Motor	The fan motor is asynchronous with an external rotor, with high efficiency and low consumption. The motor has ball bearings and is equipped with a thermal overload fuse. Max. ambient temperature is 40 °C. IP45 rating.
Terminal block	The terminal block is accessible after removing the front grille.
Noise level	The noise given in the table corresponds to the sound pressure at a distance of 1 meter.
Installation	The ECO-A fans are mounted on walls or suspended ceilings. The fan is delivered assembled, the housing covered with a temporary anti-dirt cover. After installation, it is replaced by a front plate, which is loosely attached. The housing, fan motor and front plate can be supplied separately based on a special order. To facilitate the installation, a paper mounting template with mounting holes is included in the package. The inaccuracy of the wall can be compensated by turning the front grille by up to approx. 10°.

Additional Information

Weight [kg]	2.626
Availability	central warehouse
Type of good	fan
Design	bathroom
Design	ball-bearings, for the wall, non-return damper, two-speed
Manufacturer	Wernig
Output [W]	4,5
Protection IP	IPX5

Download