RFC 200-15/0,25-3-P-Z-Ex1-FM-HL

non-explosive radial fan

Price

Excl. Tax: €1,240 Incl. Tax: €1,500

in 6-8 weeks

Qty:

The RFC-Ex RFC 200-15/0,25-3-P-Z-Ex1-FM-HL explosion-proof centrifugal low-pressure fan is designed for industrial premises, civil engineering, etc., for environments with a risk of explosion. The RFC-Ex fan is a low-pressure single inlet centrifugal fan with direct drive by an electric motor with IP55 ingress protection. The temperature of the transported air can range from -30 to 40 °C, the ambient temperature must be from -20 to 40 °C due to the resistance of the electric motor. The fan cannot be used to transport air that contains solid or sticky particles larger than 100 µm, aggressive substances, abrasive additives, etc.

Speed [min-1]	1325
Current [A]	1.35
Duct diameter [mm]	200
Max. temperature [°C]	40

Description

Housing	The fan housing is made of galvanized sheet metal.
Impeller	The single inlet fan impeller is radial.
Motor	The three-phase fan motor is equipped with PTC sensors.
Installation	The RFC fan is mounted using four M8 or M10 screws and four rubber vibration isolators. The fans must be connected via a motor starter or current protection set to the nominal motor current.
Speed control	The motors can be controlled by frequency converters with stepless speed control. The motors cannot be voltage controlled!

Additional Information

Weight [kg]	30
Availability	in 6-8 weeks
Manufacturer	Alteko
Type of good	fan
Design	non-explosive
RFC/RFE Design	P - right position, Z - galvanized sheet metal, HL - horizontal positioning - feet with rubber springs - vertical axis of rotation of the impeller, Ex1-FM - Ex ZONE 1/2 outside and inside, can be controlled by frequency converter

Download