Select your country
Prices Inc.Tax Excl.Tax
FansRoof fansRF
RF56354E

RF 56/35-4E

roof radial fan

Price

Regular Price: €912 €1,103

Special Price Excl. Tax: €775 Incl. Tax: €938

within a week

The roof centrifugal fan RF with vertically exhaust, are designed for suction air from normal areas with extending to the outdoor areas and space unprotected from the weather with a temperature range between -30 and + 40 °C . When choosing a fan for the required flow and pressure is generally valid rule that more fans with a greater number of poles reach the required parameters at lower speeds, resulting in lower noise and higher durability. Produced as standard dimensional and performance series single-phase and three-phase RF fans enables designers to optimize all parameters ideal. The fan with the appropriate (optional) roof extension can be placed on flat and pitched roofs.


Speed [min-1]1360
Air Flow Volume [m3/h]2500
Current [A]1.7
Input Power [W]310
Voltage230V
Max. temperature [°C]60
Description
Motor

The roof fan is by type equipped with one of two types power unit:
AC 1x230V/50Hz: compact asynchronic fan engine with external rotor and squirrel cage. Electroengines are saved into impeller and they are optimally cooled via air flow. With a low residual current and voltage control options.Thermal fuse via Protection of the electroengine. Single-phase electroengines are equipped starter capacitor, which is located next to terminal block, protection IP54.
AC 3x400V/230V 50Hz (Y/D): flange IEC asynchronous engine squirrel cage. Terminal is located on the engine body. Electric engines are kept out of the airflow and are protected against direct contact with the air. The engine cooling system to ensure internal channels. engine protection class IP55. The engine thermal protection performed by the thermal exited into the cable, see chapter engine protection. Engine insulation system corresponds to temperature class F insulation with warming in class B. Thermal insulation class is determined by the engine manufacturer and is listed on the rating plate of the engine.

Terminal block

Electroinstalation is finished with terminal, protection IP54. Single-phase electromotors are equipped with starter capacitor, which is saved next to terminal block. Schema of the connection are on the list 74.

Installation

The fan must be transported air without solid, fibrous, sticky, aggressive and explosive impurities. Air mass may contain chemicals that corrode or degrade zinc, aluminum or plastics. The maximum allowable air temperature must not exceed + 40 °C (1-phase fans), respectively. + 60 °C (single-phase fans). Fans RF can be operated, transported and stored only in the horizontal position (suction from below). The device can be used without additional measures in areas of normal (IEC 60364-5-51, resp. 332000-5-51 ed.2 CSN, CSN 332000-3) extending to the outdoor spaces and spaces unprotected from the weather with a temperature range between -30 to + 40 °C.

Additional Information
Weight [kg] 10.5
Availability within a week
Manufacturer Remak
Type of good fan
Design roof
Download
Reviews