Loading- Description
-
Housing The housing is made of white ABS plastic. The UP design with side discharge, discharge outlet diameter 74 mm. The front grille includes a filter and silencer. Impeller The radial impeller with forward curved blades is made of galvanized sheet metal. Motor The fan motor is asynchronous with an external rotor and starting capacitor. The fan is equipped with greased-for-life ball bearings and an integrated thermal protection. Temperature resistance up to 40 °C. IPX5 protection. Terminal block The terminal box is accessible by simply removing the front grille. Installation The AP is mounted on the wall or on the ceiling (to be ordered with ERKF damper). The fan is delivered assembled, the housing is covered with a temporary anti-fouling cover and after installation it is replaced with a front grille which is attached. The fan housing and motor can be supplied separately on special order. Usage Due to its parameters, the KN fan is predestined for use in ductwork with a longer duct route and higher pressure drop (while observing the ventilation rules of the fan design). The flow rate is approx. 25% lower for the AP wall-mounted fan design with rear outlet. - Additional Information
-
Weight [kg] 2.5 Availability within a week Type of good fan Design bathroom Design ball-bearings, bult-in filter, for flush-mounting, non-return damper Manufacturer Red-Ring Protection IP IPX5 Usage Due to its parameters, the KN fan is predestined for use in ductwork with a longer duct route and higher pressure drop (while observing the ventilation rules of the fan design). The flow rate is approx. 25% lower for the AP wall-mounted fan design with rear outlet. - Download
-
- Reviews
-
