KBR 355E4/K

kitchen radial fan

Price

Excl. Tax: €0 Incl. Tax: €0

out of sortiment

The KBR 355E4/K centrifugal kitchen fan is designed primarily for ventilation of kitchens with a maximum exhaust air temperature of 120 °C. The advantage of the KBR fan is high performance and very low noise due to the insulated housing. The KBR fan has a motor located outside the air flow and is equipped with a swing-out door for easy maintenance and service. The fan includes mounting brackets with rubber silencers.

Speed [min-1]	1330
Air Flow Volume [m3/h]	2801
Current [A]	2.1
Input Power [W]	319
Voltage	230V
Duct diameter [mm]	355
Max. temperature [°C]	120
Protection IP	IP54
Noise [dB(A)]	41
Insulation class	F

Description

Housing	The fan housing is made of galvanized sheet steel with a 50 mm layer of thermal and noise insulation.
Impeller	The impeller with backward curved blades is made of aluminum.
Motor	The fan motor is located outside the air flow on the access door. The standard IEC motor is equipped with thermal contacts connected to the fan terminal block, which must be connected to the corresponding thermal protection relay.
Terminal block	The terminal is placed on the engine.
Noise level	The noise level is measured in distance 1,5 m in axis suction with full operating engine the fan.
Installation	The fan is adapted for mounting on a flat surface using mounting brackets. It can be installed in any position with respect to the composition of the transported air to prevent oil, water, etc from leaking. The KBR fans can also be installed outdoors if you use the WSD weather roof.
Speed control	The speed control is performed by a two-stage switch, a five-stage transformer or a frequency converter.

Additional Information