HXTR/4-400 E

wall mounted axial fan

Price

Excl. Tax: €230 Incl. Tax: €278

out of sortiment

The HXTR/4-400 E axial fan is suitable for ventilation directly through a wall. The HXTR wall fan is suitable for industrial applications, for ventilation of halls, establishments, warehouses, etc. The HXTR fan is an axial fan designed for wall mounting and can be installed in both horizontal and vertical positions.

Speed [min-1]	1250
Air Flow Volume [m3/h]	3600
Duct diameter [mm]	400
Voltage	400V
Power [W]	140
Current [A]	0.41
Max. temperature [°C]	55
Noise [dB(A)]	64

Description

Housing	The fan housing is made of galvanized steel sheet and provided with black lacquer. Mounting brackets and screws are galvanically plated.
Impeller	The impeller is made of AL alloy. The "SICKLE" shape to achieve the maximum possible air flow volume and pressure with minimum noise. The impeller is pressed directly onto the fan motor.
Motor	Asynchronous motor with squirrel-cage, external rotor and start capacitor. The motor is equipped with greased-for-life ball bearings. The motor is dynamically balanced according to ISO 1940. Power supply 400 V, ingress protection IP54, insulation class F.
Terminal block	The terminal block is located on the motor and is made of black plastic.
Noise level	The noise emitted by the fan is shown in the tables. The measurement is made at a distance equal to three times the diameter of the impeller (minimum 1.5 m) on the intake side.
Installation	The fan can be mounted in any position of the motor axis. In the case of horizontal mounting, the condensate drain holes must be opened in the rotor. It is necessary to use flexible connections to the ducts.
Direction of rotation	The direction of rotation of the fan cannot be changed. The air flows from the motor towards the impeller as standard.

Additional Information