Loading- Description
-
Housing The fan housing is made of galvanized steel sheet and provided with black lacquer. Mounting brackets and screws are galvanically plated. Impeller The impeller is made of AL alloy. The "SICKLE" shape to achieve the maximum possible air flow volume and pressure with minimum noise. The impeller is pressed directly onto the fan motor. Motor Asynchronous motor with squirrel-cage, external rotor and start capacitor. The motor is equipped with greased-for-life ball bearings. The motor is dynamically balanced according to ISO 1940. Power supply 400 V, ingress protection IP54, insulation class F. Terminal block The terminal block is located on the motor and is made of black plastic. Noise level The noise emitted by the fan is shown in the tables. The measurement is made at a distance equal to three times the diameter of the impeller (minimum 1.5 m) on the intake side.
Installation The fan can be mounted in any position of the motor axis. In the case of horizontal mounting, the condensate drain holes must be opened in the rotor. It is necessary to use flexible connections to the ducts. Direction of rotation The direction of rotation of the fan cannot be changed. The air flows from the motor towards the impeller as standard. - Additional Information
-
Weight [kg] 62 Availability in 3-4 weeks Manufacturer Soler & Palau Type of good fan Design wall mounted - Download
-
Data sheet ds-hxbr-hxtr-en.pdf - Reviews
-
