HV 300 A

wall mounted window axial fan

electric damper window design

Price

Regular Price: €484 €586

Special Price Excl. Tax: €412 Incl. Tax: €498

central warehouse

Delivery to 02.05?
Order Tomorrow to 12:00

Qty:

The HV 300 A axial window fan is designed for installation directly into a window or into a wall with direct discharge into the outdoor environment. The HV 300 A window fan is designed for both air supply and exhaust with control via a CR 300 controller (5 operating modes) and via an electrically operated louvre shutter. The HV wall fan can be used for ventilation of offices, shops, restaurants and similar spaces.

Speed [min-1]	1150
Air Flow Volume [m3/h]	1100
Airflow rate [m3/hod]	1100/750
Current [A]	0.3
Power [W]	68
Voltage	230V
Protection IP	IPX4
Noise [dB(A)]	38

Description

Housing	The fan housing is made of white impact-resistant plastic.
Impeller	The impeller is axial made of high-quality impact-resistant plastic. It has aerodynamically and performance-optimized blades, secured on the shaft against slipping.
Motor	The motor is asynchronous, with external rotor and auxiliary phase. The motor has for-life-grease-filled plain bearings. IPX4 ingress protection. Design with double insulation and thermal protection.
Terminal block	The terminal block is accessible after removing the front grille of the fan. Connection is possible by cable under plaster or on the wall surface. The terminal block contains a strain relief clamp to prevent the cable from being pulled out.
Noise level	The noise level is measured at a distance of 3 m in the intake axis with the fan running at maximum speed.
Installation	The fan is designed to be installed in a single or double glazed window with a thickness of 3 to 25 mm. With 3 bolts, the fan can be installed as a wall fan for air supply or exhaust directly through a wall. The installation is possible in walls with a thickness of 25 to 300 mm. The HV fans are suitable for ventilation directly through a wall or window.
Usage	The HV 300 A is switched on and off with a CR 300 controller, the individual modes 1 to 5 are selected via a rotary and rocker switch. 1. fan off, shutter closed (lights off) 2. fan running, shutter open, exhaust mode, higher speed (orange light on) 3. fan running, shutter open, exhaust mode, low speed (orange and green lights on) 4. fan off, shutter open (natural ventilation - green light on) 5. intake (reverse) mode, higher speed (orange light flashes)
Variants	A - The fan is equipped with an electrically operated return damper and a CR 150 controller.

Additional Information

EAN	8413893072078
Weight [kg]	5.1
Availability	central warehouse
Type of good	fan
Design	electric damper, window design
Design	wall mounted, window
Fan colour	white
Manufacturer	Soler & Palau
Airflow rate [m3/hod]	1100/750
Protection IP	IPX4
Usage	The HV 300 A is switched on and off with a CR 300 controller, the individual modes 1 to 5 are selected via a rotary and rocker switch. 1. fan off, shutter closed (lights off) 2. fan running, shutter open, exhaust mode, higher speed (orange light on) 3. fan running, shutter open, exhaust mode, low speed (orange and green lights on) 4. fan off, shutter open (natural ventilation - green light on) 5. intake (reverse) mode, higher speed (orange light flashes)

Download