- Description
-
Housing The fan housing is made of white impact-resistant plastic.
Impeller The impeller is axial made of high-quality impact-resistant plastic. It has aerodynamically and performance-optimized blades, secured on the shaft against slipping. Motor The motor is asynchronous, with external rotor and auxiliary phase. The motor has for-life-grease-filled plain bearings. IPX4 ingress protection. Design with double insulation and thermal protection. Terminal block The terminal block is accessible after removing the front grille of the fan. Connection is possible by cable under plaster or on the wall surface. The terminal block contains a strain relief clamp to prevent the cable from being pulled out. Noise level The noise level is measured at a distance of 3 m in the intake axis with the fan running at maximum speed. Installation The fan is designed to be installed in a single or double glazed window with a thickness of 3 to 25 mm. With 3 bolts, the fan can be installed as a wall fan for air supply or exhaust directly through a wall. The installation is possible in walls with a thickness of 25 to 300 mm. The HV fans are suitable for ventilation directly through a wall or window. Usage The HV 230 RC is controlled by a wireless controller (supplied with the fan). The HV 230 RC has 6 operating modes:
1. fan off, shutter closed (lights off)
2. fan running, shutter open, exhaust mode, higher speed (orange light on)
3. fan running, shutter open, exhaust mode, low speed (orange and green lights on)
4. fan off, shutter open (natural ventilation - green light on)
5. intake (reverse) mode, higher speed (orange light flashes)
6. intake mode, low speed (orange light flashes, green light on)Variants RC - The fan is equipped with a return louver damper, electrically operated by remote control (included). - Additional Information
-
EAN 8413893088413 Weight [kg] 3.5 Availability central warehouse Type of good fan Design electric damper, reversible operation, window design, with remote control Design wall mounted, window Fan colour white Manufacturer Soler & Palau Airflow rate [m3/hod] 600/450 Protection IP IPX4 Usage The HV 230 RC is controlled by a wireless controller (supplied with the fan). The HV 230 RC has 6 operating modes:
1. fan off, shutter closed (lights off)
2. fan running, shutter open, exhaust mode, higher speed (orange light on)
3. fan running, shutter open, exhaust mode, low speed (orange and green lights on)
4. fan off, shutter open (natural ventilation - green light on)
5. intake (reverse) mode, higher speed (orange light flashes)
6. intake mode, low speed (orange light flashes, green light on) - Download
-
3D DXF hv230-3d.dxf 3D DWG hv230-3d.dwg 2D DXF hv230-2d.dxf 2D DWG hv230-2d.dwg Data sheet ds-hv-en.pdf - Reviews
-