HCFB/6-560 H

wall mounted axial fan

Price

Regular Price: €1,182 €1,430

Special Price Excl. Tax: €1,004 Incl. Tax: €1,215

in 4-6 weeks

Qty:

HCFB/6-560 H is a wall mounted axial fan designed for wall mounting. The fan is suitable for HVAC and industrial applications where low noise level and high airflow are advantageous. The HCFB/6-560 H axial wall fan can be installed both horizontally and vertically. The speed control is performed by electronic or transformer controllers by changing the voltage. The fan is designed to exhaust air outwards - the direction of air flow from the motor to the impeller.

Speed [min-1]	905
Air Flow Volume [m3/h]	8180
Duct diameter [mm]	560
Voltage	230V
Power [W]	321
Current [A]	1.3
Max. temperature [°C]	70
Protection IP	IP65
Noise [dB(A)]	59

Description

Housing	The fan casing is made of sheet steel, painted black, the mounting brackets and screws are electroplated.
Impeller	The fan impeller is made of thermoplastic fibreglass with a blade rotation of 32° or 34° as standard. The impeller is statically and dynamically balanced.
Motor	The motor is asynchronous with a stator equipped with cooling fins and painted black. It is equipped with grease-filled bearings for life and thermal protection of the windings. Operating temperature -40 C° to +70 C°. Insulation class F, protection class IP65.
Speed control	Speed control is carried out by electronic or transformer regulators by changing the voltage.
Terminal block	The terminal block is located on the fan motor, is made of black plastic and is equipped with a start-up capacitor.
Noise level	The noise emitted by the fan is given in the tables, the measurement is made at a distance equal to three times the impeller diameter (minimum 1.5 m) on the suction side.
Installation	The fan can be mounted in any position of the motor axis. The housing must not transmit mechanical stresses from the building structure.
Direction of rotation	The direction of rotation can be changed. With a standard impeller, the flow rate drops by approx. 30% when the direction of rotation is reversed. With the wall-mounted version, the standard air flow is from the motor to the impeller.

Additional Information