Loading
Transport fans
The transport fans are designed for extraction of coarse and loose materials such as sawdust, woodchips, grain and for air extraction during grinding, welding, etc. The transport fans find their application mostly in the engineering and agricultural industry, but their resistance will be appreciated also by the operators of small and medium-sized workshops.
The fans are designed to achieve high vacuum values. Due to the spheres and applications where the transport fans are used, the Transfer ducts or the Flexadur and Ventitec flexible hoses for the extraction of abrasive materials are most often used as recommended accessories, depending on the content and temperature of the extracted air.
-
KA 501/2 P4A 3 kW
transportný fanExcl. Tax: €0 Incl. Tax: €0in 6-8 weeksAir: 1080Noise: 82 -
KA 711/2 P4A 9,2 kW
transportný fanExcl. Tax: €0 Incl. Tax: €0in 6-8 weeksAir: 1640Noise: 93 -
KB 561/2 P4A 9 kW
transportný fanExcl. Tax: €0 Incl. Tax: €0in 6-8 weeksAir: 4230Noise: 89 -
KM 282/2 R4A
transportný fanExcl. Tax: €0 Incl. Tax: €0in 6-8 weeksAir: 1510Noise: 73 -
KM 451/2 R4A
transportný fanExcl. Tax: €0 Incl. Tax: €0in 6-8 weeksAir: 11040Noise: 88 -
KM 452/4 R4A
transportný fanExcl. Tax: €0 Incl. Tax: €0in 6-8 weeksAir: 2930Noise: 68 -
KM 451/4 R4A
transportný fanExcl. Tax: €0 Incl. Tax: €0in 6-8 weeksAir: 5350Noise: 69 -
-25%
KM 221/2 R4A
transportný fanRegular Price: €534 €646
Special Price Excl. Tax: €400 Incl. Tax: €484
in 6-8 weeksAir: 1080Noise: 68 -
-25%
KM 252/2 R4A
transportný fanRegular Price: €571 €691
Special Price Excl. Tax: €428 Incl. Tax: €518
in 6-8 weeksAir: 1080Noise: 70 -
-25%
KM 251/2 R4A
transportný fanRegular Price: €595 €720
Special Price Excl. Tax: €447 Incl. Tax: €540
in 6-8 weeksAir: 1470Noise: 71 -
VAN 100
transportný radial fanExcl. Tax: €476 Incl. Tax: €576in 3-4 weeksAir: 1250Duct: 100Noise: 75 -
-25%
KM 281/2 R4A
transportný fanRegular Price: €678 €820
Special Price Excl. Tax: €508 Incl. Tax: €615
in 6-8 weeksAir: 2070Noise: 74 -
-25%
KM 312/2 R4A
transportný fanRegular Price: €742 €898
Special Price Excl. Tax: €556 Incl. Tax: €673
in 6-8 weeksAir: 2160Noise: 77 -
VAN 200
transportný radial fanExcl. Tax: €572 Incl. Tax: €692in 3-4 weeksAir: 2220Duct: 125Noise: 76 -
-25%
KM 311/2 R4A
transportný fanRegular Price: €807 €977
Special Price Excl. Tax: €605 Incl. Tax: €733
in 6-8 weeksAir: 2930Noise: 78 -
-25%
KM 352/2 R4A
transportný fanRegular Price: €990 €1,198
Special Price Excl. Tax: €742 Incl. Tax: €898
in 6-8 weeksAir: 3060Noise: 80 -
-25%
K 311/2 R4A
transportný fanRegular Price: €1,008 €1,220
Special Price Excl. Tax: €756 Incl. Tax: €915
in 6-8 weeksAir: 230Noise: 72 -
-25%
K 351/2 R4A
transportný fanRegular Price: €1,069 €1,293
Special Price Excl. Tax: €801 Incl. Tax: €970
in 6-8 weeksAir: 260Noise: 73 -
-25%
KM 351/2 R4A
transportný fanRegular Price: €1,070 €1,294
Special Price Excl. Tax: €802 Incl. Tax: €971
in 6-8 weeksAir: 4320Noise: 81 -
-25%
K 401/2 R4A
transportný fanRegular Price: €1,193 €1,444
Special Price Excl. Tax: €895 Incl. Tax: €1,083
in 6-8 weeksAir: 290Noise: 74 -
-25%
KA 401/2 P4A 0,75 kW
transportný fanRegular Price: €1,193 €1,444
Special Price Excl. Tax: €895 Incl. Tax: €1,083
in 6-8 weeksAir: 550Noise: 75 -
VAN 300
transportný radial fanExcl. Tax: €900 Incl. Tax: €1,089in 3-4 weeksAir: 4300Duct: 180Noise: 79 -
-25%
K 451/2 R4A
transportný fanRegular Price: €1,344 €1,627
Special Price Excl. Tax: €1,008 Incl. Tax: €1,220
in 6-8 weeksAir: 290Noise: 76 -
-25%
KA 451/2 P4A 1,1 kW
transportný fanRegular Price: €1,344 €1,627
Special Price Excl. Tax: €1,008 Incl. Tax: €1,220
in 6-8 weeksAir: 640Noise: 78 -
-25%
KM 402/2 R4A
transportný fanRegular Price: €1,346 €1,628
Special Price Excl. Tax: €1,009 Incl. Tax: €1,221
in 6-8 weeksAir: 4250Noise: 84
VAN
Thanks to their design, the VAN high-pressure transport fans achieve high suction and mainly vacuum performances at relatively low input power consumption. The VAN radial transport fans are most often used for air suction without filtration during welding or grinding and for transport of loose material such as chips, sawdust, woodchips, and the like.K
The K transport radial fans are intended for continuous operation with the temperature of transported air mass from -20 to 60 °C. The housing of the transport fan is made of steel sheet protected by a primer cataphoretic paint and polyurethane varnish. The K radial fans are intended for the transport of fine materials or pneumatic transport (dust amount <50 000 mg/m3). On request it is possible to deliver a fan in stainless steel, with a two-speed motor or a high-temperature version up to 150 °C.
KA
The KA transport radial fan is designed for continuous operation, the temperature of transported air mass from -20 to 60 °C. The housing of the transport fan is made of sheet steel protected by a cataphoretic primer and polyurethane lacquer. The KA radial fan is designed for the transport of fine materials or for pneumatic transport (dust volume <50 000 mg/m3). On request, it is possible to supply a fan in stainless steel, with a two-speed motor or a high-temperature version up to 150 °C.
KB
The KB transport radial fans are designed for continuous operation, the temperature of transported air mass from -20 to 60 °C. The housing of the transport fan is made of sheet steel protected by a cataphoretic primer and polyurethane lacquer. The KB radial fans are suitable for the transport of fine materials or for pneumatic transport (dust volume <50 000 mg/m3). On request, it is possible to supply a fan in stainless steel, with a two-speed motor or a high-temperature version up to 150 °C.
KC
The KC transport radial fans are designed for continuous operation, the temperature of transported air mass from -20 to 60 °C. The housing of the transport fan is made of sheet steel protected by a cataphoretic primer and polyurethane lacquer. The KC radial fans are designed for the transport of fine materials and for pneumatic transport (dust volume <50 000 mg / m3). On request, it is possible to supply a fan in stainless steel, with a two-speed motor or a high-temperature version up to 150 °C.
KM
The KM transport radial fans are designed for continuous operation, the temperature of transported air mass from -20 to 60 °C. The housing of the transport fan is made of sheet steel protected by a cataphoretic primer and polyurethane lacquer. The KM radial fans are designed for the transport of fine materials and for pneumatic transport (dust volume <50 000 mg/m3). On request, it is possible to supply a fan in stainless steel, with a two-speed motor or a high-temperature version up to 150 °C.
