- Description
-
Housing The fan housing is made of a frame construction with 25 mm thick sandwich panels. The panels are made of galvanized sheet metal and equipped with a lacquer and with sound insulation of glass mineral wool. The individual panels are interchangeable with an outlet connection panel. The circular connections on the fan housing are equipped with a single-lip seal. The fan is located in the housing on sprung profiles to prevent the transmission of vibrations. Impeller The radial impeller with backward curved blades is made of sheet steel and is statically and dynamically balanced. Motor The three-phase motor is equipped with a PTC thermistor. The motor has greased-for-life ball bearings. Ingress protection IP55, insulation class F. Terminal block The terminal block is located on the motor. Noise level The noise emitted is show in table. Values acustic performance in individual octave, see in table. Sound pressure listed in the specification table is measured at a distance of 1.5 m on the suction side 2/3 max air output.<
Installation The mounting is only possible with the motor axis horizontal. The location of the discharge connection can be changed. Speed control Speed control is performed by frequency converters. - Additional Information
-
EAN 8413893747921 Weight [kg] 149 Availability in 3-4 weeks Type of good fan Design duct, silent Manufacturer Soler & Palau Min. temperature [°C] -20 Protection IP IP55 - Download
-
Data sheet ds-cvab-n-cvat-n-en.pdf - Reviews
-