- Description
-
Housing The fan's cupboard is made of mechanical resistant plastic in light gray color. On the housing are 4 suction throat Ø 125 mm and one displace throat Ø 125 mm, 3 of these suction throat are standard blinded. The base station with engine can be easily removed for cleaned or revision.
Impeller The fan's impeller is centrifugal with back cursed blades. The impller is staticly and dynamicaly balanced.
Motor The fan's engine is asynchronous with internal rotor and is equipped with ball bearings lubricated for life. The engine has a one-time thermal overload protection. Operating temperature is from -10 °C to 50 °C. The fan engine has insulation class B and protection type IP44.
Terminal block The terminal is not included. From the cupboard come out grommet 5-wire cable.
Noise level The level of noise is measured in distance 1,5 m in axis of suction line with full performance of fan's engine.
Installation The mounting of these fans is can be instal with 4 screws on the wall or on the ceiling. Unused suction throat must be fitted with blanking plugs, that are included in the package. On the suction and pressure side of the fan must be connected to the duct with a minimum length of 0.9 meters.
- Additional Information
-
Weight [kg] 4 Availability out of sortiment Fan colour grey Type of good fan Design bathroom Design ball-bearings, standard model Manufacturer Soler & Palau Protection IP IP44 - Download
-
- Reviews
-