CB 250 plus

bathroom radial fan

ball-bearings non-return damper standard model

Price

Regular Price: €72 €87

Special Price Excl. Tax: €47 Incl. Tax: €57

in stock

Delivery to 30.04?
Order Today to 14:00

Qty:

The centrifugal fan with low front cover (built-in) suitable for duct lenght to 13 m. The suction due fan CB 100 plus is can be into duct with max. Lenght 13 m. The fans can be mounting in vertical or horizontal postition. The fan is suitable to operating in indoor basic space with ambient temperature of 0 to +40 °C, for transport clean air without dust, grease, chemical vapors and other pollutants. It is also necessary to ensure, that the fan and the freezing of running into him condensate water from the pipeline. Under the cover are also accessible controls to set the desired deceleration delay and the desired moisture (for models with appropriate equipment).

Speed [min-1]	2500
Air Flow Volume [m3/h]	270
Power [W]	45
Voltage	230V
Max. temperature [°C]	40
Duct diameter [mm]	120
Protection IP	IP40
Noise [dB(A)]	52

Description

	The front cover can be unscrewed to remove the locking screw and rinse under running water. Given that the removal of the front cover thus exposing the terminals, the fan must first be disconnected from the mains supply by turning off the circuit breaker. Model designation T are equipped with a timer setting deceleration ramp time between 3-15 minutes. (red knob). The model with the designation H are equipped with automatic humidity setting the desired level of humidity in the range 40-90% rel. humidity (blue button) and zároveňobsahují doběhového timer function. For models marked H flashing red light on the front cover for the presence of phase auxiliary control terminal (indicates the mode forced to run - manual switch regardless of the level of humidity in the room).
Housing	The housing and front cover are made of durable white ABS thermoplastic with high colour fastness. The front cover is secured with one screw on the lower edge.
Impeller	The fan impeller is radial and is made of ABS.
Motor	The asynchronous squirrel-cage fan motor is equipped with greased-for-life plain bearings and an axial bearing for horizontal mounting. The motor is equipped with a disposable thermal overload protection. The maximum operating temperature is 40 °C. Power supply 230 V / 50 Hz, IPX4 rating.
Terminal block	The terminal block is accessible after unscrewing the locking screw and removing the front cover.
Noise level	The noise level is measured at a distance of 2 m in the suction axis with the fan running at full speed.
Installation	The CB fans can be mounted both on walls and in ceilings. For this type of mounting, the fan has four holes in the corners of the housing under the front cover. The package also includes wall plugs and screws. The fan allows connection to ducts with a diameter of 100 mm. It is also necessary to ensure that the fan does not get damaged by frost and that condensate from the ducts does not flow down into it.

Additional Information

EAN	8422248114417
Weight [kg]	2
Availability	in stock
Fan colour	white
Type of good	fan
Design	bathroom
Design	ball-bearings, non-return damper, standard model
Manufacturer	Cata
Protection IP	IP40

Download