CB 100 plus T

bathroom radial fan

ball-bearings non-return damper time overrun

Price

Regular Price: €63 €76

Special Price Excl. Tax: €41 Incl. Tax: €49

in stock

Delivery to 30.04?
Order Today to 14:00

Qty:

The CB 100 plus T radial fan with a low front cover is suitable for relatively long ductworks and for ventilation of bathrooms, toilets, garages, technical rooms, etc. Air extraction by means of the CB 100 fan is possible into ducts with a maximum length of 13 m. The fan can be mounted in walls or in ceilings, because it is equipped with plain bearings and an axial bearing for operation in a horizontal position. Under the cover, controls are available for setting the required overrun time (3 to 15 minutes).

Speed [min-1]	2300
Air Flow Volume [m3/h]	130
Power [W]	25
Voltage	230V
Max. temperature [°C]	40
Duct diameter [mm]	100
Protection IP	IP40
Noise [dB(A)]	49

Description

	The front cover can be removed and washed under running water after unscrewing the locking screw. Due to the fact that when removing the front cover, the terminal block is exposed, it is necessary to first disconnect the fan from the power by switching off the circuit breaker. The model marked T is equipped with an overrun timer with an overrun time setting in the range of 3 - 15 min.
Housing	The housing and front cover are made of durable white ABS thermoplastic with high colour fastness. The front cover is secured with one screw on the lower edge.
Impeller	The fan impeller is radial and is made of ABS.
Motor	The asynchronous squirrel-cage fan motor is equipped with greased-for-life plain bearings and an axial bearing for horizontal mounting. The motor is equipped with a disposable thermal overload protection. The maximum operating temperature is 40 °C. Power supply 230 V / 50 Hz, IPX4 rating.
Terminal block	The terminal block is accessible after unscrewing the locking screw and removing the front cover.
Noise level	The noise level is measured at a distance of 2 m in the suction axis with the fan running at full speed.
Installation	The CB fans can be mounted both on walls and in ceilings. For this type of mounting, the fan has four holes in the corners of the housing under the front cover. The package also includes wall plugs and screws. The fan allows connection to ducts with a diameter of 100 mm. It is also necessary to ensure that the fan does not get damaged by frost and that condensate from the ducts does not flow down into it.

Additional Information

EAN	8422248114394
Weight [kg]	1
Availability	in stock
Fan colour	white
Type of good	fan
Design	bathroom
Design	ball-bearings, non-return damper, time overrun
Manufacturer	Cata
Protection IP	IP40

Download