Loading- Description
-
Housing The fan housing is made of galvanized sheet metal, heat and sound insulation. The fan impeller is separated from the motor thermally insulated partition. On the fan housing is positioned thermostat control. The thermal sensor is located in the fan discharge. On the fan can be mounted on the bypass chamber and a non-return valve. If the temperature increases above 70°C in the bypass chamber opens the inlet suction of cold air. In the event that the fan stops (eg. Power outage) goes through the bypass chamber hot air from the fireplace.
Impeller The fan impeller is radial with forward curved blades of galvanized sheet metal. The impeller is statically and dynamically balanced.
Motor The fan engine is asynchronous squirrel cage. The engine is equipped with protection against overheating at 150°C. Protection IP20.
Terminal block Fan connection via terminal cable under plaster or on plaster. Ending a fixed connection in the wiring box, which is not included.
Noise level The noise emitted by the fan is measured at a distance of 1,5 m in the axis of the fan on the suction side.
Installation Mounting the fan is possible in each position of the motor axis. Ventilation holes on the engine must not be covered.
- Additional Information
-
Weight [kg] 5 Availability out of sortiment Type of good fan Design fire place Manufacturer Soler & Palau Protection IP IP40 - Download
-
- Reviews
-
