Loading- Description
-
The unit is equipped with a water heater for a water temperature drop of 80/60 °C for an inlet air temperature of -12 °C. It is equipped with an operating and emergency thermostat. One or more of F7 class filters are located in the unit. Filters with filtration classes G4 to F9 can be supplied on request. The filters are replaced via the unit inspection door. The unit can be supplemented with another filtration stage using the MFL filter cartridge with MFR filter inserts. The input voltage of the fan is 1x230V/50Hz. Housing The housing is fitted with 45 mm panels for acoustic and thermal insulation and the frame is made of aluminium profiles. There is a service door on the unit for easier service and maintenance. Impeller The fan impeller with backward curved blades is made of composite material and it is statically and dynamically balanced. Motor The EC motor of the fan is powered by 230V, IP44 rating. The motor can be controlled by a 0 - 10V external signal or by a PWM speed controller. The motor is equipped with built-in thermal protection. Terminal block The terminal block of the electric motor is located inside the unit. Installation The units are installed in horizontal position with the service door on the underside (H1 design) or with the service door on the side (H2 design). There must be space kept for removing the service door and for servicing. Speed control The unit is supplied without control. If required, the unit is supplied with a Minireg control or with a Digireg control for more comfortable control with external communication. - Additional Information
-
Weight [kg] 173 Availability in 4-6 weeks Manufacturer Soler & Palau Type of good ventilation unit Design inlet Pipe dimension [mm] 1200x600 - Download
-
- Reviews
-
