Select your country
Prices Inc.Tax Excl.Tax
RME1200400Ekonovent

RME 1200/400 Ekonovent

inlet ventilation unit

Price
Excl. Tax: €0 Incl. Tax: €0
in 4-6 weeks
The RME 1200/400 Ekonovent supply air ventilation unit with an electric heater is designed for ventilation of commercial premises. The RME supply air unit is equipped with an energy-saving fan with an EC motor and with a F7 class filter. The RME ventilation unit is supplied without control. If required, the unit is supplied with a simple Minireg control or a Digireg control for more comfortable control.

Air Flow Volume [m3/h]1200
Current [A]16.5
Power [W]10800
Duct diameter [mm]400
Voltage400V
Description
The unit is equipped with an electric heater for an inlet air temperature of -12 °C. It is equipped with an operating and emergency thermostat. One or more of F7 class filters are located in the unit. Filters with filtration classes G4 to F9 can be supplied on request. The filters are replaced via the unit inspection door. The unit can be supplemented with another filtration stage using the MFL filter cartridge with MFR filter inserts. The input voltage of the fan is 1x230V/50Hz and the input voltage of the heater is 1x230V/50Hz (RME 800/315 - RME 6000: 3x400V/50Hz)
Housing The housing is fitted with 45 mm panels for acoustic and thermal insulation and the frame is made of aluminium profiles. There is a service door on the unit for easier service and maintenance.
Impeller The fan impeller with backward curved blades is made of composite material and it is statically and dynamically balanced.
Motor The EC motor of the fan is powered by 230V, IP44 rating. The motor can be controlled by a 0 - 10V external signal or by a PWM speed controller. The motor is equipped with built-in thermal protection.
Terminal block The heater terminal block is located under the outer cover of the unit. The terminal block of the electric motor is located inside the unit.
Installation The units are installed in horizontal position with the service door on the underside (H1 design) or with the service door on the side (H2 design). There must be space kept for removing the service door and for servicing.
Speed control The unit is supplied without control. If required, the unit is supplied with a Minireg control or with a Digireg control for more comfortable control with external communication.
Additional Information
Weight [kg] 68
Availability in 4-6 weeks
Manufacturer Soler & Palau
Type of good ventilation unit
Design inlet
Download
Reviews