Select your country
Prices Inc.Tax Excl.Tax
SP300200085

IDEO 575 Ecowatt PH

heat recovery unit

Price
Excl. Tax: €0 Incl. Tax: €0
on ask

The IDEO 575 Ecowatt PH heat recovery ventilation unit with counterflow plate heat exchanger is designed for ventilation of commercial and residential buildings and achieves a maximum efficiency of up to 92%. The IDEO 575 Ecowatt PH heat recovery unit is equipped with centrifugal fans with high efficiency and low consumption DC EC motors, an integrated 1500 W preheating and G4 and M5 filters (alternatively F7). For the summer period the unit is equipped with an exchanger bypass.


Air Flow Volume [m3/h]680
Current [A]2.5
Power [W]362
Duct diameter [mm]200
Voltage230V
Noise [dB(A)]35
Description
Housing The housing of the unit is made of galvanized steel sheet with white painting. There are connections on the top side and a condensate drain on the bottom side. An antenna with a range of up to 150 m in the open area is located on the top of the housing. The unit is equipped with an automatic exchanger bypass.
Installation The unit can be mounted vertically as standard, or horizontally when using the IDEO 325 kit. When mounting the unit, it is necessary to leave a clear space in front of the unit for changing filters and cleaning the unit. In areas where the intake air temperature often drops below -5 °C, it is recommended to install frost protection on the fresh air intake.
Speed control The unit is equipped with a CAV controller. The values are set on the controller with display. The unit is also equipped with a BOOST control mode - when this button is pressed, the air flow volume is increased to the maximum value for 10 minutes. The BOOST buttons are most commonly used in toilets, bathrooms, kitchens and lounges.
Additional Information
EAN 8413893917812
Weight [kg] 109
Availability on ask
Manufacturer Soler & Palau
Type of good heat recovery unit
Download
Reviews