Select your country
Prices Inc.Tax Excl.Tax

Take-off hoods

Take-off hoods

The VHL are design deflector hoods designed for air extraction.
The HV are deflector hoods with a bevelled top edge. Roof hoods are designed for air exhaust.
The H are roof circular hoods designed for air extraction.
The HF are flanged deflector hoods equipped with an anti-dirt netting and with an outlet funnel for water that flows from the hood through a hose.
The HN are deflector hoods equipped with an anti-dirt netting and with an outlet funnel for water that flows from the hood through a hose.

Set Ascending Direction

1-25 of 89

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • HN 125

    HN 125

    roof take-off  
    Excl. Tax: €60 Incl. Tax: €73
    on ask
    Diameter: 125
  • VHL 200

    VHL 200

    roof take-off  
    Excl. Tax: €221 Incl. Tax: €267
    in 1-2 weeks
    Diameter: 200
  • HN 400

    HN 400

    roof take-off  
    Excl. Tax: €365 Incl. Tax: €442
    in 1-2 weeks
    Diameter: 400
  • VHL 355

    VHL 355

    roof take-off  
    Excl. Tax: €0 Incl. Tax: €0
    in 1-2 weeks
    Diameter: 355
  • VHL 315

    VHL 315

    roof take-off  
    Excl. Tax: €486 Incl. Tax: €588
    in 1-2 weeks
    Diameter: 315
  • HN 630

    HN 630

    roof take-off  
    Excl. Tax: €559 Incl. Tax: €677
    in 1-2 weeks
    Diameter: 630
  • VHL 600

    VHL 600

    roof take-off  
    Excl. Tax: €1,265 Incl. Tax: €1,531
    in 1-2 weeks
    Diameter: 600
  • HV 250

    HV 250

    roof take-off  
    Excl. Tax: €174 Incl. Tax: €211
    in 1-2 weeks
    Diameter: 250
  • HN 1120

    HN 1120

    roof take-off  
    Excl. Tax: €2,674 Incl. Tax: €3,236
    in 1-2 weeks
    Diameter: 1120
  • VHL 1000

    VHL 1000

    roof take-off  
    Excl. Tax: €2,880 Incl. Tax: €3,485
    in 1-2 weeks
    Diameter: 1000
  • HV 800

    HV 800

    roof take-off  
    Excl. Tax: €1,802 Incl. Tax: €2,180
    in 1-2 weeks
    Diameter: 800
  • HF 450

    HF 450

    roof take-off  
    Excl. Tax: €444 Incl. Tax: €537
    in 1-2 weeks
    Diameter: 450
  • H 160

    H 160

    roof take-off  
    Excl. Tax: €91 Incl. Tax: €110
    in 1-2 weeks
    Diameter: 160
  • HF 710

    HF 710

    roof take-off  
    Excl. Tax: €948 Incl. Tax: €1,148
    in 1-2 weeks
    Diameter: 710
  • HF 1250

    HF 1250

    roof take-off  
    Excl. Tax: €2,432 Incl. Tax: €2,943
    in 1-2 weeks
    Diameter: 1250
  • HN 200

    HN 200

    roof take-off  
    Excl. Tax: €86 Incl. Tax: €104
    in 1-2 weeks
    Diameter: 200
  • H 500

    H 500

    roof take-off  
    Excl. Tax: €427 Incl. Tax: €517
    in 1-2 weeks
    Diameter: 500
  • VHL 160

    VHL 160

    roof take-off  
    Excl. Tax: €187 Incl. Tax: €226
    in 1-2 weeks
    Diameter: 160
  • HN 315

    HN 315

    roof take-off  
    Excl. Tax: €168 Incl. Tax: €203
    in 1-2 weeks
    Diameter: 315
  • VHL 250 S

    VHL 250 S

    roof take-off  
    Excl. Tax: €0 Incl. Tax: €0
    in 1-2 weeks
    Diameter: 250
  • HN 560

    HN 560

    roof take-off  
    Excl. Tax: €423 Incl. Tax: €511
    in 1-2 weeks
    Diameter: 560
  • VHL 500

    VHL 500

    roof take-off  
    Excl. Tax: €442 Incl. Tax: €535
    in 1-2 weeks
    Diameter: 500
  • HV 160

    HV 160

    roof take-off  
    Excl. Tax: €115 Incl. Tax: €140
    in 1-2 weeks
    Diameter: 160
  • HN 900

    HN 900

    roof take-off  
    Excl. Tax: €1,168 Incl. Tax: €1,413
    in 1-2 weeks
    Diameter: 900
  • VHL 800

    VHL 800

    roof take-off  
    Excl. Tax: €2,219 Incl. Tax: €2,685
    in 1-2 weeks
    Diameter: 800

Set Ascending Direction

1-25 of 89

Page:
  1. 1
  2. 2
  3. 3
  4. 4

VHL

VHL

The VHL roof circular hood is a terminal HVAC element designed for air inlet and outlet. The circular hood with ribs is designed to achieve an architecturally interesting end of the sleeve.


- temperature resistance of standard version made of galvanized sheet metal from -30 °C to +100 °C, short-term temperature resistance from -50 °C to +120 °C
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)
- made of galvanized sheet metal, varnished on request

 

HV

HV

The HV circular roof hoods are terminal HVAC elements for outdoor air extraction. The roof circular hoods are with bevelled upper side, designed for exhaust air.

- temperature resistance of standard version from galvanized sheet metal from -30 °C to +100 °C, short-term temperature resistance from -50 °C to +120 °C
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)
- designation 1 without flange, designation 2 with flange
- standardly made of galvanized sheet metal, on request available made of aluzinc, of stainless acid-resistant steel or painted

 

H

H

The H roof circular hoods are a HVAC outdoor terminal element designed for air discharge. For installation on the roof with or without roof penetration. On request it can be available with a net.


- temperature resistance of standard version made of galvanized sheet metal from -30°C to +100 °C, short-term temperature resistance from -50 °C to +120 °C
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)
- up to 315 mm diameter without flange, from 400 mm with a flange
- standardly made of galvanized sheet metal, on request available made of aluzinc, of stainless acid-resistant steel or painted

 

HN

HN

The HN deflector hoods are designed for circular ducts for installation on the roof for air discharge. The hoods have an external spiro connection as standard. Hoods with other connection can be ordered as well. The deflector hoods are equipped with a net to prevent the entry of larger dirt and with an outlet funnel for water that flows from the hood through a hose.

- temperature resistance of the hood is from -45 to +65 °C
- standardly made of galvanized sheet metal, on request available made of aluzinc, of stainless acid-proof steel, coated or with eye bolts
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)

 

HF

HF

The HF deflector hoods are designed for circular ducts for installation on the roof for air discharge. The hood is standardly equipped with a flange for a fixed connection to the circular ducts. It is possible to order hoods with another connection. The deflector hoods are also equipped with a net to prevent the entry of larger dirt and with an outlet funnel for water that flows from the hood through a hose. The hoods are equipped with three eye bolts for easier handling.

- temperature resistance of the hood is from -45 to +65 °C
- standardly made of galvanized sheet metal, on request available made of aluzinc, of stainless acid-resistant steel or painted
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)