Select your country
Prices Inc.Tax Excl.Tax

Roof hoods

Roof hoods

The VHL are design lamella hoods designed for air extraction.
The HV are circular roof hoods with a bevelled top edge. The roof hoods are designed for air exhaust.
The H are circular roof hoods designed for air extraction.
The HF are roof hoods with a flange connection equipped with an anti-dirt net and with a funnel to collect water, which is drained out of the hood through a hose.
The HN are roof hoods equipped with an anti-dirt net and with a funnel to collect water, which is drained out of the hood through a hose.

Set Ascending Direction

1-25 of 104

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • VHL 900

    VHL 900

    roof take-off  
    Excl. Tax: €2,709 Incl. Tax: €3,278
    in 1-2 weeks
    Diameter: 900
  • VHL 800

    VHL 800

    roof take-off  
    Excl. Tax: €2,219 Incl. Tax: €2,685
    in 1-2 weeks
    Diameter: 800
  • VHL 710

    VHL 710

    roof take-off  
    Excl. Tax: €1,805 Incl. Tax: €2,184
    in 1-2 weeks
    Diameter: 710
  • VHL 630

    VHL 630

    roof take-off  
    Excl. Tax: €1,265 Incl. Tax: €1,531
    in 1-2 weeks
    Diameter: 630
  • VHL 600

    VHL 600

    roof take-off  
    Excl. Tax: €1,265 Incl. Tax: €1,531
    in 1-2 weeks
    Diameter: 600
  • VHL 560

    VHL 560

    roof take-off  
    Excl. Tax: €1,221 Incl. Tax: €1,478
    in 1-2 weeks
    Diameter: 560
  • VHL 500

    VHL 500

    roof take-off  
    Excl. Tax: €442 Incl. Tax: €535
    in 1-2 weeks
    Diameter: 500
  • VHL 450

    VHL 450

    roof take-off  
    Excl. Tax: €429 Incl. Tax: €519
    in 1-2 weeks
    Diameter: 450
  • VHL 400

    VHL 400

    roof take-off  
    Excl. Tax: €416 Incl. Tax: €504
    in 1-2 weeks
    Diameter: 400
  • VHL 355

    VHL 355

    roof take-off  
    Excl. Tax: €0 Incl. Tax: €0
    in 1-2 weeks
    Diameter: 355
  • VHL 315 S

    VHL 315 S

    roof take-off  
    Excl. Tax: €0 Incl. Tax: €0
    in 1-2 weeks
    Diameter: 315
  • VHL 315

    VHL 315

    roof take-off  
    Excl. Tax: €486 Incl. Tax: €588
    in 1-2 weeks
    Diameter: 315
  • VHL 250 S

    VHL 250 S

    roof take-off  
    Excl. Tax: €0 Incl. Tax: €0
    in 1-2 weeks
    Diameter: 250
  • VHL 250

    VHL 250

    roof take-off  
    Excl. Tax: €255 Incl. Tax: €308
    in 1-2 weeks
    Diameter: 250
  • VHL 200 S

    VHL 200 S

    roof take-off  
    Excl. Tax: €0 Incl. Tax: €0
    in 1-2 weeks
    Diameter: 200
  • VHL 200

    VHL 200

    roof take-off  
    Excl. Tax: €221 Incl. Tax: €267
    in 1-2 weeks
    Diameter: 200
  • VHL 160 S

    VHL 160 S

    roof take-off  
    Excl. Tax: €0 Incl. Tax: €0
    in 1-2 weeks
    Diameter: 160
  • VHL 160

    VHL 160

    roof take-off  
    Excl. Tax: €187 Incl. Tax: €226
    in 1-2 weeks
    Diameter: 160
  • VHL 1250

    VHL 1250

    roof take-off  
    Excl. Tax: €3,663 Incl. Tax: €4,432
    in 1-2 weeks
    Diameter: 1250
  • VHL 125 S

    VHL 125 S

    roof take-off  
    Excl. Tax: €0 Incl. Tax: €0
    in 1-2 weeks
    Diameter: 125
  • VHL 125

    VHL 125

    roof take-off  
    Excl. Tax: €163 Incl. Tax: €197
    in 1-2 weeks
    Diameter: 125
  • VHL 1120

    VHL 1120

    roof take-off  
    Excl. Tax: €3,468 Incl. Tax: €4,196
    in 1-2 weeks
    Diameter: 1120
  • VHL 1000

    VHL 1000

    roof take-off  
    Excl. Tax: €2,880 Incl. Tax: €3,485
    in 1-2 weeks
    Diameter: 1000
  • VHL 100 S

    VHL 100 S

    roof take-off  
    Excl. Tax: €0 Incl. Tax: €0
    in 1-2 weeks
    Diameter: 100
  • VHL 100

    VHL 100

    roof take-off  
    Excl. Tax: €139 Incl. Tax: €168
    in 1-2 weeks
    Diameter: 100

Set Ascending Direction

1-25 of 104

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

HU

HU
 

VHL

VHL

The VHL roof circular hood is a terminal HVAC element designed for air inlet and outlet. The circular hood with ribs is designed to achieve an architecturally interesting end of the sleeve.


- temperature resistance of standard version made of galvanized sheet metal from -30 °C to +100 °C, short-term temperature resistance from -50 °C to +120 °C
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)
- made of galvanized sheet metal, varnished on request

 

HV

HV

The HV circular roof hoods are terminal HVAC elements for outdoor air extraction. The roof circular hoods are with bevelled upper side, designed for exhaust air.

- temperature resistance of standard version from galvanized sheet metal from -30 °C to +100 °C, short-term temperature resistance from -50 °C to +120 °C
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)
- designation 1 without flange, designation 2 with flange
- standardly made of galvanized sheet metal, on request available made of aluzinc, of stainless acid-resistant steel or painted

 

H

H

The H roof circular hoods are a HVAC outdoor terminal element designed for air discharge. For installation on the roof with or without roof penetration. On request it can be available with a net.


- temperature resistance of standard version made of galvanized sheet metal from -30°C to +100 °C, short-term temperature resistance from -50 °C to +120 °C
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)
- up to 315 mm diameter without flange, from 400 mm with a flange
- standardly made of galvanized sheet metal, on request available made of aluzinc, of stainless acid-resistant steel or painted

 

HN

HN

The HN deflector hoods are designed for circular ducts for installation on the roof for air discharge. The hoods have an external spiro connection as standard. Hoods with other connection can be ordered as well. The deflector hoods are equipped with a net to prevent the entry of larger dirt and with an outlet funnel for water that flows from the hood through a hose.

- temperature resistance of the hood is from -45 to +65 °C
- standardly made of galvanized sheet metal, on request available made of aluzinc, of stainless acid-proof steel, coated or with eye bolts
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)

 

HF

HF

The HF deflector hoods are designed for circular ducts for installation on the roof for air discharge. The hood is standardly equipped with a flange for a fixed connection to the circular ducts. It is possible to order hoods with another connection. The deflector hoods are also equipped with a net to prevent the entry of larger dirt and with an outlet funnel for water that flows from the hood through a hose. The hoods are equipped with three eye bolts for easier handling.

- temperature resistance of the hood is from -45 to +65 °C
- standardly made of galvanized sheet metal, on request available made of aluzinc, of stainless acid-resistant steel or painted
- basic design meets standards according to EN 1506
- duct tightness C and D according to EN 12237 (II to IV according to DIN 24194)