Cartridge dampers and valves
-
BX-1H 100
fireproof metal outlet air disc valveExcl. Tax: €96.08 Incl. Tax: €116.26in 2-3 weeksDuct: 100 -
BX-1H 125
fireproof metal outlet air disc valveExcl. Tax: €104.96 Incl. Tax: €127in 2-3 weeksDuct: 125 -
BX-1H 160
fireproof metal outlet air disc valveExcl. Tax: €124.60 Incl. Tax: €150.77in 2-3 weeksDuct: 160 -
BX-1H 200
fireproof metal outlet air disc valveExcl. Tax: €155.52 Incl. Tax: €188.18in 2-3 weeksDuct: 200 -
-9%
CFDM 100 EI120S .01
fire damperRegular Price: €34.76 €42.06
Special Price Excl. Tax: €31.28 Incl. Tax: €37.85
in 2-3 weeksDuct: 100 -
-10%
CFDM 100 EI120S .11
fire damperRegular Price: €41.84 €50.63
Special Price Excl. Tax: €37.66 Incl. Tax: €45.57
in 2-3 weeksDuct: 100 -
-10%
CFDM 100 EI120S .15
fire damperRegular Price: €48.80 €59.05
Special Price Excl. Tax: €43.92 Incl. Tax: €53.14
in 2-3 weeksDuct: 100 -
-9%
CFDM 100 EI60S .01
fire damperRegular Price: €31.72 €38.38
Special Price Excl. Tax: €28.55 Incl. Tax: €34.55
in 2-3 weeksDuct: 100 -
CFDM 100 EI60S .11
fire damperExcl. Tax: €0 Incl. Tax: €0on askDuct: 100 -
-9%
CFDM 100 EI60S .15
fire damperRegular Price: €38.72 €46.85
Special Price Excl. Tax: €34.85 Incl. Tax: €42.17
in 2-3 weeksDuct: 100 -
-10%
CFDM 100 EI90S .01
fire damperRegular Price: €29.68 €35.91
Special Price Excl. Tax: €26.71 Incl. Tax: €32.32
in 2-3 weeksDuct: 100 -
-10%
CFDM 100 EI90S .11
fire damperRegular Price: €36.68 €44.38
Special Price Excl. Tax: €33.01 Incl. Tax: €39.94
in 2-3 weeksDuct: 100 -
-9%
CFDM 100 EI90S .15
fire damperRegular Price: €43.72 €52.90
Special Price Excl. Tax: €39.35 Incl. Tax: €47.61
in 2-3 weeksDuct: 100 -
-10%
CFDM 125 EI120S .01
fire damperRegular Price: €38.44 €46.51
Special Price Excl. Tax: €34.60 Incl. Tax: €41.87
in 2-3 weeksDuct: 125 -
-10%
CFDM 125 EI120S .11
fire damperRegular Price: €45.44 €54.98
Special Price Excl. Tax: €40.90 Incl. Tax: €49.49
in 2-3 weeksDuct: 125 -
-9%
CFDM 125 EI120S .15
fire damperRegular Price: €52.44 €63.45
Special Price Excl. Tax: €47.20 Incl. Tax: €57.11
in 2-3 weeksDuct: 125 -
-10%
CFDM 125 EI60S .01
fire damperRegular Price: €26.28 €31.80
Special Price Excl. Tax: €23.65 Incl. Tax: €28.62
in 2-3 weeksDuct: 125 -
-10%
CFDM 125 EI60S .11
fire damperRegular Price: €33.28 €40.27
Special Price Excl. Tax: €29.95 Incl. Tax: €36.24
in 2-3 weeksDuct: 125 -
-10%
CFDM 125 EI60S .15
fire damperRegular Price: €40.28 €48.74
Special Price Excl. Tax: €36.25 Incl. Tax: €43.86
in 2-3 weeksDuct: 125 -
-10%
CFDM 125 EI90S .01
fire damperRegular Price: €32.44 €39.25
Special Price Excl. Tax: €29.20 Incl. Tax: €35.33
in 2-3 weeksDuct: 125 -
-10%
CFDM 125 EI90S .11
fire damperRegular Price: €39.40 €47.67
Special Price Excl. Tax: €35.46 Incl. Tax: €42.91
in 2-3 weeksDuct: 125 -
-9%
CFDM 125 EI90S .15
fire damperRegular Price: €46.44 €56.19
Special Price Excl. Tax: €41.80 Incl. Tax: €50.58
in 2-3 weeksDuct: 125 -
-10%
CFDM 160 EI120S .01
fire damperRegular Price: €45.28 €54.79
Special Price Excl. Tax: €40.75 Incl. Tax: €49.31
in 2-3 weeksDuct: 160 -
-9%
CFDM 160 EI120S .11
fire damperRegular Price: €52.24 €63.21
Special Price Excl. Tax: €47.02 Incl. Tax: €56.89
in 2-3 weeksDuct: 160 -
-10%
CFDM 160 EI120S .15
fire damperRegular Price: €59.28 €71.73
Special Price Excl. Tax: €53.35 Incl. Tax: €64.55
in 2-3 weeksDuct: 160
F-C2

The F-C2 cartridge fire dampers are fire dampers for circular air ducts with fire resistance classes EI60S, EI90S and EI120S. The F-C2 fire dampers are a passive fire protection element designed to separate individual fire compartments and prevent the spread of gases, smoke and flame. The F-C2 fire dampers are equipped as standard with a thermal fuse (H0) that closes the damper when the temperature reaches 72°C or can be equipped with a limit switch (H1) that signals the damper position status.
The F-C2 fire damper consists of galvanized steel sheet, steel (up to size 125) or calcium silicate blade (from size 140), graphite fire laminate and polyurethane foam. The damper is also fitted with an intumescent seal which increases its volume in the event of a fire. The maximum permissible pressure on the damper is 300 Pa.
CFDM

The fire dampers CDFM are closures in ducts of HVAC equipment, which prevent the spread of fire and combustion products from one fire compartment to another by closing the air ducts in the places of installation according to ČSN 73 0872.
The damper blade automatically cuts off the air passage by means of a closing spring. The closing spring is activated by initializing the thermal fuse. The spring closes the damper blades.
After closing the blade, the damper is sealed against the passage of smoke by means of a foam seal. At the same time, the damper blade is embedded in a mass, which increases its volume due to the increasing temperature and closes the air duct airtight.
The fire damper can be equipped with a disc valve in both combinations - for outlet (TVOM) and for inlet (TVPM). The valve is fixed by springs in the damper body and can be easily disconnected from the damper. The valve can only be installed on a damper with an extended body (CFDM-V).
Characteristics of dampers:
- CE certification according to EN 15650
- tested according to EN 1366-2
- classified according to EN 13501-3+A1
- fire resistance EIS 120, EIS 90, EIS 60
- tightness according to EN 1751, class 2 through the damper blade, external tightness is equal to the duct system
- corrosion resistance according to EN 15650
- EC Certificate of Conformity No. 1391-CPR-2018/0129
- declaration of performance No. PM/CFDM/01/20/1, PM/CFDM-V/01/20/1
- hygienic assessment - Opinion No. 1.6/pos/19/19b
SC / SCV

The SC+ fire dampers are fire shutters designed for installation directly in circular ducts. The SCV+ are fire dampers with disc valve designed for circular ducts suitable for air supply and exhaust. Exceptions in this category are dampers marked SC0 or SCV0, which are designed only for extraction and are certified only for integrity “E”.
The fire dampers have a thermal fuse which melts when the temperature exceeds 72 °C and closes the damper. The *fire resistance* of the damper is EI60S/90/120, depending on the design, wall construction and installation method. The fuse is replaceable and can be ordered separately.
BX-1H

The BX-1H circular fire disc valves are designed for installation in vertical fire partitions or at the beginning of ducting routes. The regulating disc allows the air flow regulation and the locking is provided by a lock nut. In case of a fire, when the temperature exceeds 72 °C, the BX-1H valve closes and separates adjacent fire compartments.
The BX-1H fire valve is classified according to ČSN EN 13501-3+A1:2010 as El 60 S. The design of the valve complies with ČSN EN 15650:2010. A 35 mm long sleeve (mounting ring) is standardly included (67, 120 or 150 mm long sleeves are available on request).
KSO-F

The fire damper valve KSO-F is made from galvanized steel sheet equipped with white color RAL 9010. Fire damper valve has seailing from foam product, regulation disc allows easily air flow regulation and fix of position via contra nut. The valve is supplied with mounting ring KKT also made of galvanized sheet steel. Suitable for horizontal ventilation pipeline. KSO-F is intended for use as a fire closure of ventilation systems.
Resistance of this ventilation device KSO-F was tested according to EN 13501-3 authorized testing and fire resistance classification cap fitted in the wall construction is E120.