The Silent Dual bathroom fans are small axial fans with a maintenance-free AC motor. The Silent dual fans operate automatically. When the motion sensor is activated or a humidity increase is detected, the fan starts operating in a preset mode to achieve the lowest power consumption and the lowest noise level. The fans are equipped with built-in motion and humidity sensors, as well as a removable non-return damper.

The Silent series fans are the quietest domestic axial fans on the market and are suitable for use in bathrooms, showers, toilets, etc. The Silent extract fans are suitable for short ducts with very low pressure drop or for ventilation directly through a wall / ceiling. The Silent quiet bathroom extract fans can be used for ducts with a maximum length of up to 3 meters. The Silent domestic axial fans are in all versions available with a non-return damper and supplemented with accessories such as rundown timer, humidity sensor, motion sensor or delayed start.

The Silent Design series fans are the quietest domestic axial fans on the market and are suitable for use in bathrooms, showers, toilets, etc. The Silent Design quiet fans are suitable for short ducts with very low pressure drop or for ventilation directly through a wall / ceiling. The Silent Design bathroom extract fans can be used for ducts with a maximum length of up to 3 meters.

The Silent Design domestic axial fans are in all versions available with a non-return damper and supplemented with accessories such as rundown timer or humidity sensor. The Silent Design 12V fans are made in a safe IP57 design for installation in shower enclosures or over bathtubs. Colour variants: white, silver, marble white, marble black, black, grey, gold, red or even champagne, barcelona or ivory.

The E-100 / E-120 / E-150 are small axial fans that are among the most popular, most efficient and quietest on the market. The fans are designed for bathroom installation, but can also be used in other areas where moisture or unpleasant odours need to be extracted to prevent mould. These fans use a perimeter suction system. The noise from the ductwork does not radiate directly through the fan into the room, but hits the faceplate, some of it bounces back and only a small part radiates to the sides (beneficial for noise reduction). The glass faceplate of the e100 fans can be easily removed by turning, washed under running water and put back on. 

The bathroom fans are equipped with high-quality, high-efficiency ball bearing motors and are available in several versions: G - standard, GL - with LED, GT - with timer, GTH - with humidistat and timer and in the colour variants white, silver and black.

The Decor series domestic axial fans are designed for short ducts with very low pressure drop or for ventilation directly through a wall / ceiling. The Decor fans are designed for use in bathrooms, shower enclosures, toilets, etc. The Decor bathroom extract fans can be used for ducts with a maximum length of up to 3 meters. The Decor domestic axial fans are in all versions available with a non-return damper and supplemented with accessories such as rundown timer, humidity sensor or motion sensor.

The Decor Design domestic axial fans are designed for short ducts with very low pressure drop or for ventilation directly through a wall / ceiling. The Decor Design fans are designed for use in bathrooms, shower enclosures, toilets, etc. and are equipped with a white front panel made of impact-resistant plastic. The Decor Design bathroom extract fans can be used for ducts with a maximum length of up to 3 meters. The Decor Design domestic axial fans are in all versions available with a non-return damper and supplemented with accessories such as rundown timer or humidity sensor.

The X-MART small axial fans are suitable for use in bathrooms, toilets, etc. The X-MART bathroom fans can be used for ducts with a maximum length of up to 3 meters. The X-MART fans have a unique faceplate design, thanks to which much less noise penetrates the room. The INOX version indicates a colour design where the fan body is grey and the front plate is lapped with a brushed stainless steel sheet. The X-MART fans are suitable for short ducts with very low pressure drop or for ventilation directly through a wall/ceiling. The X-MART small axial fans is possible to supply equipped with a non-return damper and equipped with accessories such as rundown timer or humidity sensor.

The ICON small axial fans are designed for ventilation of bathrooms, toilets, etc. The unique design of these fans looks very discreet and yet stylish. The ICON fans are equipped with a unique built-in damper with three blades, which prevents air backflow, reduces noise, prevents heat leakage from the room and dust penetration. The fans are equipped with high-quality bearings, thanks to which it is possible to choose wall or ceiling mounting. The ICON fans are available in several colour variants: white, gold, silver, anthracite, chrome. In addition to the ICON fans, it is possible to purchase the following control modules: TM - with an overrun timer (1-45 min), HTM - humidity sensor with overrun, DTM - with an overrun timer (2-40 min) and delayed start (2 min), PCM - pull switch, PRTM - infrared sensor with overrun.

The Helios MiniVent M1 small axial fans are designed for ventilation of small rooms and are manufactured with two power levels and equipped with a non-return damper. The small domestic fans are available in three sizes - 100 mm, 120 mm and 150 mm. The Helios MiniVent 1 bathroom fans are designed for ventilation of toilets, bathrooms or other small or medium rooms in flats and residential buildings. The MiniVent 1 silent axial fans are almost unhearable, because their noise level ranges from 25 dB (A). The ingress protection of the MiniVent M1 fans is IP45.

The Helios MiniVent M1 small axial fans are available as standard with two speeds, with an adjustable overrun timer (6, 10, 15, 21 min), with a start delay (0, 45, 90, 120 s) , with a humidity sensor (humidistat) or with a motion sensor.

BF Silent are bathroom fans with a designer front cover made of 100% recycled plastic. The casing is in white RAL 9010. Unique impeller design ensures increased efficiency and low fan noise. BF Silent bathroom fans are suitable for continuous and intermittent operation and have an integrated non-return damper. BF Silent fans are ideal for extracting air from bathrooms, toilets and other smaller spaces. The bathroom fans are equipped with high quality ball bearings and are available in BF SILENT - standard, BF SILENT T - with timer, BF SILENT HT - humidistat and timer

The LHV axial wall fans are characterized by a low noise level, easy installation and easy maintenance. The LHV window fans are designed for ventilation of common rooms, offices, waiting rooms, restaurants and similar spaces. The LHV fans are equipped with a fixing plate for easy installation in a window pane. The LHV window fans are designed for indoor operation with an ambient temperature of up to +40 °C. The front protective grille is made of metal. The LHV fans can be supplemented with an external gravity grille made of the same material.

Fans type HCM N small window axial fans with protective grille and outdoor dampers, fans are suitable for installation on the window glass panel (max. Thickness. 8 mm) or wall, the displacement directly to the outside. The cabinet is made of impact-resistant plastic, color is white. HCM fan is equipped with an automatic discharge dampers and protective grid on both sides. Axial impeller is made of impact resistant plastic. Motor asynchronous squirrel cage and shaded pole. It features overload protection. The maximum operating temperature is around 40°C. HCM has a fan motor bearings with grease filling for life. Protection IP X4. The terminal block is accessible after removing the front grille of the fan. Connecting a cord above. Fans HCM can be controlled speed controllers. Speed control is done by changing the voltage. The noise emitted by the fan is measured at a distance of 1.5 m in the axis of the fan on the suction side.

The Silentub small axial duct fans are designed to be installed directly in ducts or on a wall with supplementary accessories. The Silentub silent fans are suitable for ventilation of small offices, waiting rooms, toilets and similar areas. The Silentub duct fans have ball bearings and are designed for indoor use with ambient temperature up to +40 °C. In conjunction with a humidistat combined with a thermostat, the fans can be used for ventilation of humid areas.

The small TDM axial duct fans are designed to be installed directly in ducts. The TDM fans are designed for short ducts with very low pressure drop or for ventilation directly through a wall/ceiling. The TDM duct fans are suitable for ventilation of small offices, waiting rooms, toilets and similar areas. The TDM duct fans are designed for indoor operation with an ambient temperature of up to +40 °C.

The HV axial window fans are designed for installation directly into a window or into a wall with direct discharge into the outdoor environment. The HV window fans can be operated in both supply and exhaust mode. The HV wall fans are designed for ventilation of common rooms, offices, waiting rooms and similar spaces. The HV fans are available in several designs - manually operated (M) via integral pull cord or controller (E), with wireless remote control (RC), with manually or electrically operated (A) louvre shutter and in both air supply and exhaust mode.

The Punto Evo small axial fans are designed for small and medium-sized rooms with direct exhaust or exhaust into short ducts. The fans have adjustable delayed start, an overrun timer and automatic cycling. The Punto Evo fans are designed for wall or ceiling installation in any position and are equipped with a built-in non-return damper. The fans are available in the following versions: with ball bearings (LL), with an adjustable overrun timer (3 to 20 minutes) (T), with a pull switch (P), with an adjustable humidistat (60%, 70%, 80%, 90%) with an adjustable overrun timer (3 to 20 minutes) (T-HCS) and with a motion infrared sensor with an adjustable overrun timer (3 to 20 minutes) (PIR).

The Punto Evo Gold small axial fans are designed for small and medium-sized rooms with direct exhaust or with exhaust into short ducts. The Punto Evo fans have a built-in non-return damper that prevents air from entering when the fan is switched off. The Punto Evo Gold fans are available in the following versions - with ball bearings (LL) or with ball bearings and an adjustable overrun timer (3 to 20 minutes) (LL T). The Punto Evo Gold fans are characterized by original colour and design.

The Punto small axial fans are designed for ventilation of small rooms such as bathrooms, toilets, kitchens, etc. The Punto fans are designed for wall or ceiling installation in any position, or for window installation with additional accessories. The Punto fans are available in a standard version or in the following versions: LL - ball bearings, T - overrun timer (3 to 20 minutes), P - cable control, A - automatic grille, T-HCS - adjustable humidistat (60%, 70%, 80%, 90%) with an adjustable overrun timer (3 to 20 minutes), PIR - infrared sensor switch, MHC - electronic microprocessor.

The Punto Four small axial fans are designed for wall or ceiling mounting and for air extraction from small rooms such as bathrooms and toilets. The Punto Four fans have a built-in non-return damper that prevents backflow of air when the fans are switched off.

The Punto Filo small axial fans are designed for ventilation of small rooms such as bathrooms and toilets. The fans have a built-in non-return damper, which prevents backflow of air when the fan is switched off. The Punto Filo fans have the thinnest 17 mm front grille from the entire Punto range. The fans are available in several versions: T - adjustable overrun timer (3 to 20 minutes), LL - ball bearings, PIR - motion sensor with adjustable overrun timer (3 to 20 minutes) and T-HCS - adjustable humidistat (60%, 70%, 80%, 90%) with adjustable overrun timer (3 to 20 minutes).

The Punto Evo Flexo small axial fans are designed for ventilation of small and medium-sized rooms with exhaust into short ducts or directly outside, such as toilets, bathrooms, etc. The fans are made of anti-UV ABS plastic and equipped with a non-return damper.

The Vort Notus small axial fans are suitable for ventilation of small rooms, such as bathrooms and toilets. The fans are designed for wall and ceiling installation with connection to short ducts. The fans are equipped with automatic speed control, which ensures the required air flow at various pressure losses. The Vort Notus bathroom fans are equipped with very economical DC-EC motors designed for continuous operation.

The Vario axial fans are designed for air extraction and for mounting in walls, ceilings or windows. The Vario window fans are suitable for installation in apartments / flats, shops, cafes, restaurants, etc. Thanks to the profile of the blades of the axial impeller, the fans achieve low noise and low energy consumption. The fans have IPX4 rating. Window / wall mounting kits are supplied separately.

The small axial fans are available in the following versions: P - pull switch, LL - ball bearings, A - automatic grille, R - reverse operation, S - increased power, I - recessed into walls / ceilings

The Future small axial fans are suitable for short air ducts with low pressure drop or for ventilation directly through a wall. The Future fans can be used for ventilation in residential buildings, for cooling of devices, in bathrooms or toilets. The bathroom fans are available in the following versions. C - with non-return damper, CT - overrun timer and non-return damper, CZ - with non-return damper and ball bearings, CTZ - with non-return damper, overrun timer and ball bearings.

The EDM small axial fans are suitable for ventilation directly through walls or for short air ducts with very low pressure drop. The EDM fans are suitable for bathrooms and toilets. The EDM fans can be used for ventilation in residential buildings and in conjunction with a HYG 2 humidistat or a humidistat combined with a thermostat for ventilation of damp areas.
Variants R and T can be switched on with a button.
The fans are available in the following versions - Standard, Z - equipped with ball bearings, T - with a overrun timer that has a set overrun time (8 minutes) and also a delayed start, R - adjustable overrun timer in the range of 2 - 20 min, EC - motion sensor with an adjustable overrun timer, C - equipped with an electric louver damper, VM - window design, 12V - 12V design.

The HEF small axial fans are suitable for short air ducts with low pressure drop or for ventilation directly through walls. The HEF fans can be used for ventilation in apartment buildings, in bathrooms or toilets, as well as for cooling of devices. The HEF fans are available in the following versions: basic design, P - with an automated electrically operated louver damper, T - overrun timer (4-8 minutes), PT - with an automatic electrically controlled louver damper including an overrun timer (4-8 minutes)

The METEOR axial table fans are portable fans with or without heater. The METEOR table fans are made of impact-resistant grey plastic and are equipped with an oscillating front plastic grille. The grille has inclined blades and during operation it rotates around its axis in the entire range of 360° and thus changes the direction of the air flow. The METEOR fan is suitable for ventilation of living rooms, offices, banks, restaurants, establishments, workshops, shops, etc.

Artic axial fans are a range of design axial fans for a wide range of applications - Artic fans are mobile (Artic JET, Artic N GR and Artic CN GR), tower (Artic Tower N), designed for wall mounting (Artic PM, PRC) or ceiling mounting (Artic R). The fans include a removable protective grille and a motor with thermal fuse.

ECA ipro are small wall mounted axial fans designed for short ducts with low pressure drop. The small bathroom fansare suitable for continuous operation and can be switched between two speed levels. The ECA ipro bathroom exhaust fans with design front cover are equipped with an economical maintenance-free motor with ball bearings and overheating protection. The fans are in RAL 9016 white, IP X5 protection.

Depending on the design, the fans can also be equipped with an adjustable delayed start or overrun timer, humidity sensor, motion sensor, photocell and electric shut-off damper or an FM receiver.

EN / ENR are wall-mounted axial fans suitable for areas such as shops, offices, restaurants, production facilities, etc. The EN axial fans are designed for exhaust air, the ENR reversible axial fans for both exhaust and supply air. The EN / ENR axial wall fans excel thanks to their removable front cover for easy cleaning, are maintenance-free and have a low noise level. The fans are equipped with a robust motor with overheating protection and suitable for continuous operation. The electrical connection can be flush-mounted or recessed.