The MultiMaxx heater units are used for heating, cooling, ventilation or air filtration and are used in industrial, warehouse, sales and exhibition spaces. The MultiMaxx heating units are available in five sizes with 4 output designs.

The specific characteristics of the heating units and the wide range of accessories (louvres, nozzles, anemostats) provide the most efficient and cheapest solution.

The MultiMaxx warm air units are equipped with AC or EC motors. Ceiling or wall installation.

The MultiMaxx fan heaters are available in 2 housing designs (Comfort and Industry) and are developed in 6 types (HN, HS, HX, HD, HE, HG) depending on the type of medium and area of use.

The Nevada heating units are used for heating, cooling and ventilation in industrial, warehouse, sales and exhibition spaces. The Nevada heating units are available in 2 sizes for electrical heating (4.5-20kW) and 3 sizes for water heating (6-92 kW).

The construction of the Nevada fan heaters is made of galvanized sheet metal and can be painted RAL 9010 or without painting. The brackets are available for wall or under-ceiling mounting of the unit. The removable panel with the fan can be used for easy maintenance or cleaning. The Nevada heating units are equipped with high-performance maintenance-free fans, statically and dynamically balanced with a built-in thermal contact against overheating.

The Nevada W units with water heating have powerful 2, 3, and 4-row Cu/Al heat exchangers for maximally 90° /1.6 MPa. For the Nevada E heating units with electric heating, the exchangers are electronically adjustable by means of heating elements with built-in protection against overheating, including emergency electronics with the possibility of connecting a room or exhaust thermostat. The exhaust fins of the unit are adjustable as well as the wall hinge for the possibility of setting a suitable installation angle. Ingress protection IP54.

The Monzun gas heaters are designed for ventilation and heating of commercial and industrial buildings, sports halls, warehouses, etc. Power regulation of the Monzun heating units is continuously controlled by a 0-10V signal. The Monzun gas heater housing is made of galvanized painted sheet, the exchanger is made of stainless steel. From the point of view of the gas offtake equipment, it is an open or closed appliance with forced extraction of combustion products. Suitable fuels - natural gas, propane-butane or propane. Air flow volume up to 8000 m3/hour, heating output 15 - 60 kW.

The Volcano hot water heating units are used to heat industrial, warehouse, sales and exhibition areas with higher design requirements. The Volcano hot water heating units are available in 6 sizes with water heating capacity of 3-75 kW and air flow rates up to 6500 m3/hr. An exception in this category are the Volcano VR-D and VR-D Mini, which provide only air circulation without heating and its optimal distribution in the room.

The body and front panel of the Volcano fan heaters are made of high quality plastic. The Volcano unit heat exchangers are single row, double row and triple row and consist of copper tube-spiral and aluminium blades. The maximum heating medium parameters are 130°C, 1.6 MPa. The optimum fan shape and the use of a powerful EC motor ensure savings of up to 40% compared to traditional solutions. The Volcano heating units are also available with standard AC motors.

The bracket for wall and ceiling mounting allows the units to be rotated through 120° and is a standard part of every Volcano unit. The front panel blades can be adjusted in four positions.

The housings of the compact fan heaters are made of galvanized steel sheet with a red powder coating (RAL 3020), which is corrosion-resistant. The TIGER portable fan heaters are equipped with robust handles for easier handling and transfer. Thanks to the massive construction of the fan heater, it is protected against damage in the event of shocks or vibrations.

ELEKTRA are fan heaters designed for use in demanding environments. Various models are available for use especially in corrosive and damp areas, high risk of fire, high temperatures, etc. ELEKTRA fan heaters are characterized by low noise levels and quickly ensure thermal comfort in the heated space.

The Panther powerful fan heaters are very silent, suitable for stationary use. The fan heaters are designed for heating, drying and ventilation of workshops, for example. The housings of the hot air fans are made of galvanized sheet metal with white RAL 9016 powder coating. The wall mounting brackets allow the air flow to be directed sideways and downwards.

The CAT are compact and silent fan heaters designed for fixed mounting. The CAT fan heaters are suitable for small warehouses, garages, workshops and shops. The fan heaters have a classic look, the heater housing is made of galvanized steel sheet powder coated in white RAL 9016. The wall brackets of the fan heater allows to rotate the fan up to 10° for better heat distribution.

Mixing chambers (accessories) make it possible to combine heating with ventilation by mixing indoor air with outdoor air (only sizes CAT3 and CAT5).

To meet the requirements of the Ecodesign Regulation (EU) 2015/1188, the CAT fan heaters must be installed with a TAP16R thermostat (to be ordered separately). The TAP16R has an adaptive start, a weekly program and an open window detection.

SWS compact fan heaters are designed for places such as workshops, warehouses and halls. SWS fan heaters are designed for heating water connection. The fan heaters can be wall or ceiling mounted. Due to the design, the fan heaters can be rotated, the water connection can be on the left or right side.

The housing is made of grey aluminium galvanized steel panels, very resistant to corrosion. All models are supplied with adjustable louvres to control airflow in one direction. The louvres are made of anodised aluminium.

The Heater Condens water heating units are designed for commercial and industrial buildings, logistics centres, warehouses, shops, etc. The Heater Condens heating units are water heaters suitable for connection to sources with low water temperature. Thanks to the unique shapes of the front cover, they are suitable for spaces with a high demand for design - a choice of three different colours for free. The new generation of the Heater Condens water heating units uses high-performance fans with built-in three-stage speed control and up to 4-row water heat exchangers. Air flow volume up to 5250 m3/hour, heating output 5 - 120 kW, range up to 25 meters.

SWT wall-mounted fan heaters are designed for heating entrances, houses, industrial buildings. Due to the low height of the fan heater, it can be recessed into the ceiling during installation. SWT fan heaters have a robust construction made of galvanized steel powder coated in white. SWT fan heaters have a hot water heat exchanger and are designed for installation in the ceiling (when the SWTC extension is installed, the airflow range is increased).

The SWX fan heaters are designed for harsh environments where corrosion and moisture are present (SWX C). The SWX hot air fan heaters have a robust design adapted to harsh environments. The SWX hot air fans are equipped with a water heat exchanger.

SWH intelligent hot air fans with water heating and built-in SIRe control. The SWH heating fans in combination with SIRe provide automatic room heating. The built-in intelligent SIRe control ensures low energy consumption. The SWH are suitable for buildings where compact fans with heater are commonly used, such as warehouses, halls, but also for environments where quiet operation is required.  

The SWH fan heaters have a compact and attractive design and their white colour makes them suitable for industrial and commercial buildings.

The Multi Flair fan heater units combine high performance, quiet operation and high quality components. The Multi Flair heating units are designed for heating, cooling and air filtration for commercial or industrial applications such as showrooms, supermarkets, warehouses or workshops.

The Multi Flair ceiling fan heaters are ideal for all rooms with ceiling heights up to 4 metres and can be flexibly adapted to all temperature and architectural conditions. In order to integrate the unit perfectly and unobtrusively into a variety of presentation and sales areas, it is available in all RAL colours and also with a design front grille.

Catalogue sheet of the product line: ds-multi-flair-en.pdf
Operation manual: manual-multi-flair-en.pdf