Monzun

The Monzun-TE water heaters are designed for ecological ventilation and heating of commercial and industrial buildings, warehouses, halls, etc. In combination with the mixing chamber, the Monzun-TE units can be used for fresh air supply.

The Monzun-TE water heating units are manufactured in three size ranges equipped with up to a 4-row heat exchanger. On the discharge side, it is possible to choose from several outlet designs. Air flow volume up to 7500 m3/h, heating output 9.6 - 88.7 kW.

The Monzun-TE heating units with water heating are manufactured in several versions and the order code consists of several possible variants.

Dimensional range
1 – 3

Number of heat exchanger rows
1 - 4

Heating water connection
L - left (standard)
P - right

Outlet design on the discharge side
Z - basic
ZS - basic lateral
U - vertical angular
K - vertical cross

Wiring
1 - single-phase fan motor
3 - three-phase fan motor
B - without extended wiring
BT - preparation for thermostat (only with single-phase motor)
BTM - switching of several units simultaneously by one thermostat
BTP - preparation for thermostat, thermal protection of the fan (only with single-phase motor)
BTPM - preparation for thermostat, switching of several units simultaneously by one thermostat, thermal protection of the fan

Download
Catalog sheet: monzun-te-datasheet-en.pdf
Certificate: monzun-te-certifikat.pdf
Declaration of performance: monzun-te-declaration-of-conformity.pdf
EMC certificate: monzun-te-certifikat-emc.pdf
LVD certificate: monzun-te-certifikat-lvd.pdf

The Monzun-CP condensation gas heaters are designed for ventilation and heating of commercial and industrial buildings, warehouses, halls, etc. The Monzun-CP gas heaters can operate in condensation mode. The condensate drain is equipped with a siphon with level control. When the level rises, the burner of the unit is switched off until the level drops. The power control of the Monzun-CP condensation heating units is continuously controlled by a 0-10 V control signal. The Monzun-CP gas heater housing is made of galvanized painted sheet metal, the heat exchanger is made of stainless steel. From the point of view of the gas offtake equipment, it is an open or closed appliance with forced extraction of combustion products. Suitable fuels - natural gas, propane-butane or propane. Air flow volume up to 5000 m3/hour, heating output 15 - 60 kW.

Download
Catalog sheet: monzun-cp-manual-en.pdf
Certificate: monzun-cp-certifikat.pdf
Declaration of performance: monzun-cp-declaration-of-conformity.pdf
EMC certificate: monzun-cp-certifikat-emc.pdf
LVD certificate: monzun-cp-certifikat-lvd.pdf

The Monzun gas heaters are designed for ventilation and heating of commercial and industrial buildings, sports halls, warehouses, etc. Power regulation of the Monzun heating units is continuously controlled by a 0-10V signal. The Monzun gas heater housing is made of galvanized painted sheet, the exchanger is made of stainless steel. From the point of view of the gas offtake equipment, it is an open or closed appliance with forced extraction of combustion products. Suitable fuels - natural gas, propane-butane or propane. Air flow volume up to 8000 m3/hour, heating output 15 - 60 kW.

Download
Catalog sheet: monzun-manual-en.pdf
Certificate: monzun-certifikat.pdf
EMC certificate: monzun-certifikat-emc.pdf
LVD certificate: monzun-certifikat-lvd.pdf