Loading- Description
-
Housing The housing of the unit is made of EPP, ensuring low heat loss. The 125 mm diameter throats are on the top of the housing. A condensate drain is located on the underside of the housing. Installation The unit is mounted vertically on a wall with a minimum height of 300 mm above the floor. It is also necessary to leave a clear space in front of the unit to allow for regular cleaning, filter changes and servicing. The unit can be connected to the ED Flex system. If the DOMEO 210 units are installed in environments where temperatures often drop below -5 °C in winter, it is recommended to install frost protection (MBE-AFP 125/0,4) on the fresh air intake. Speed control The control is done by a controller with four potentiometers for setting the airflow volume - standard, boost, balanced mode or cooling mode in summer. It is also possible to set en equal pressure, positive pressure and negative pressure mode. The unit has a 0-10V analogue input for connecting external sensors. In the summer months it is possible to route air through a bypass and thus partially cool the rooms at night. Variants DOMEO 210 FL - Standard version with remote control
DOMEO 210 RD - Version with wireless remote control and constant airflow - Additional Information
-
Weight [kg] 40 Availability central warehouse Manufacturer Soler & Palau Type of good heat recovery unit Energy Label A - Download
-
- Reviews
-
