Circular diffusers

The KA circular diffusers are made by pressing from aluminium sheet and provided with white painting (RAL 9016). The diffusers have an integrated control damper for easy regulation of the air flow volume. The KA diffusers are only supplied separately as a front plate without a connection frame.

The ALKM circular diffusers are terminal air distribution elements suitable for air supply and exhaust. The ALKM diffusers are designed for ceiling installation or for hanging under a ceiling in office buildings, restaurants, shopping malls, etc. The diffusers are supplied with a connection box, which is galvanized. The recommended installation height is from 2.6 to 4.0 m. The air flow volume of the diffusers ranges from 110 to 1,800 m3/h. The front plate is painted in RAL 9010.

The VASM swirl diffusers are HVAC elements for the distribution of large volumes of air with a large temperature differential. The diffuser faceplate parts are made of steel sheet, the diffuser is made of aluminium sheet. The surface of the faceplates with diffusers and of the adjustable blades is coated in white RAL 9010. The connection of the diffusers is horizontal (via circular connections through the connection box from the side) or vertical (via circular connections through the connection box from above). The diffuser can be equipped with a control damper on request.

The VAPM circular / square swirl diffusers with fixed blades are end HVAC elements suitable for air supply and extraction in ventilated or conditioned spaces. The design of the VAPM swirl diffusers ensures perfect mixing of the supply air with the room air. The diffusers are designed for areas with a high concentration of people such as: shopping centres, sports halls, hotels, etc. The recommended installation of the VAPM diffusers is at a height from 2.6 to 4.0 mwith the possibility of installation in the ceiling or suspended from the ceiling. The VAPM swirl diffusers can be switched between heating and cooling thanks to the extendable centre section.

The diffuser's front plate is painted RAL 9010 and the connection box is circular with a flange in galvanised finish with the possibility of horizontal or vertical connection of the circular duct without or with a control damper. The VAPM ceiling swirl diffusers are available in sizes from 125 to 400 mm for airflow volumes from 30 to 900 m3/h.

The Konika ceiling diffusers are distribution elements designed for air extraction and supply in restaurants, schools, shopping centres, etc. We recommend installing the Konika diffusers with a THOR plenum box, which ensures stable distribution of the supplied air, or alternatively directly into a circular duct. The Konika diffusers are made of galvanized steel sheet with white powder coating.

The CRS circular ceiling swirl diffusers are end ventilation elements intended for air distribution. The CRS diffusers have fixed profiled blades and a circular front plate. The CRS ceiling swirl diffusers are designed to mix quickly the supply air and the intake air. The circular ceiling diffusers are made of galvanized sheet metal with a surface finish in RAL 9003 and can be supplied in other RAL shades on request. The diffusers are designed for air distribution in administrative buildings, offices, shopping centres, etc.

The CAP-C ceiling diffuser is a circular nozzle diffuser with a built-in plenum chamber suitable for visible installation, designed for air inlet and outlet. The CAP-C consists of nozzles, an acoustically insulated plenum chamber and a flange with rubber seal. The nozzles are made of recycled white plastic and can be freely adjusted. The diffuser is made of galvanized sheet steel with white powder coating.

The DRE-C diffusers are distribution elements suitable for air supply and exhaust, for ceiling and circular duct mounting. The DRE-C diffusers are equipped with an adjustable central cone for manual control of air flow. The diffusers are made of aluminium with a central cone made of steel, provided with white paint.

The DRE-G swirl diffusers are distribution elements suitable for air supply and exhaust, for ceiling and circular duct mounting. The DRE-G diffusers are equipped with an adjustable central cone for manual control of the air flow.

The DRE-E swirl diffusers are distribution elements designed for air supply and exhaust, for ceiling and circular duct mounting. The DRE-E diffusers are made of sheet steel in white. The swirl diffusers have fixed blades that mix the supplied air better.

The DRE-CF diffusers are distribution elements suitable for air supply and exhaust, for ceiling mounting. The DRE-CF diffusers are made of aluminium with a fixed central cone, a removable central element. They are provided with white paint and a non-return damper in a tight design.

The KHD air supply jet diffusers are distribution elements specially designed for air supply. For the KHD diffusers, the range of the air flow can be adjusted by turning the central cone. The KHD jet diffusers can also be supplied with an actuator. The air supply circular diffusers are made of galvanized steel sheet with white varnish. We recommend mounting including a TC stabilization unit, which ensures stabilization of the air flow.

The BURE high Induction diffusers are designed for the supply of hot or cold air in areas with high installation height. Most often, the BURE geometry diffusers are used in areas such as shopping centres, exhibition halls, warehouses, etc. The minimum installation height is recommended to be 4 m and the maximum 15 m.

The BURE diffusers have geometry which can be adjusted to a correct position for heating or cooling - for heating to vertical position, for cooling to horizontal position

BURE - changing the geometry is done by manual adjustment on the top of the diffuser
BURE-TC - changing the geometry is done continuously by means of a heat cartridge, which reacts to change of temperature of supplied air
BURE-M3 - changing the geometry is done continuously by means of a 24V actuator with continuous control 0-10V
BURE-M2 - changing the geometry is done stepwise by means of a 230V actuator with ON / OFF control